Inner flange for circular saw Scheppach HS105 and others
Inner flange for circular saw Scheppach HS105 and others
Inner flange for circular saw Scheppach HS105 and others
Bevel pinion diameter 31,5x10 mm n° 53 for circular saw on table Scheppach, Redstone, Toolson, Dexter
Outer flange for circular saw Scheppach HS105 and others
Segment for circular saw Scheppach HS105 and others
Suction outlet housing for Scheppach, Redstone et Dexter table saw (part 66 on the exploded view)
Saw blade guard for Scheppach, Redstone et Dexter table saw until 09/2019 (part 132 on the exploded view)
Saw blade guard for Scheppach, Redstone et Dexter table saw from 10/2019 (part 249-258 on the exploded view)
Clamping lever for Scheppach, Redstone et Dexter table saw (part 44 on the exploded view)
Riving knife 5901308082 for Scheppach table saw (from 10/2019)
Are you looking for spare parts for your Redstone TS10J table saw? At Probois Machinoutils, we offer a dedicated category for replacement components designed to help maintain and repair this machine from the Redstone brand, notably distributed through Leroy Merlin stores.
A table saw is a woodworking machine used for straight cuts, ripping operations and cutting wooden boards or panels within the limits specified by the manufacturer. Its cutting table, rip fence and adjustment mechanisms help users achieve accurate and consistent results.
Over time and with repeated use, certain components may wear out, become damaged or develop faults. Replacing a compatible spare part for the Redstone TS10J may help restore the machine to working condition and extend its service life.
This category brings together replacement parts listed for this model according to our current catalogue availability. It is important to verify the compatibility of each component before ordering.
A table saw contains several mechanical and electrical assemblies responsible for motor operation, blade rotation, workpiece guidance and accurate cutting adjustments.
With regular use, certain parts may experience normal wear. Accidental impacts, incorrect handling or excessive sawdust accumulation may also damage components.
When suitable replacement components are available, Redstone TS10J table saw spare parts can make it possible to replace individual faulty parts without necessarily purchasing an entirely new machine.
This can be particularly worthwhile when the overall structure of the saw remains in good condition and the fault concerns a replaceable component.
However, it is important to identify the exact cause of the malfunction before attempting repairs to avoid replacing parts unnecessarily.
Understanding the main components of a table saw can help identify the parts involved in maintenance and repair operations.
Depending on the machine's design, these generally include:
This overview describes components commonly found on table saws. It does not mean that every item is currently available as a spare part for the Redstone TS10J.
The power switch is an essential component for controlling the operation of a table saw.
A faulty Redstone TS10J table saw switch may cause starting difficulties, intermittent operation or prevent the motor from starting altogether.
However, these symptoms may have several possible causes:
Before replacing an electrical component, it is important to determine the actual cause of the problem.
The dimensions, rated voltage, current rating, number of connections and mounting arrangement must match the specifications of the original component.
Electrical repairs must be carried out by a qualified person after the machine has been completely disconnected from its power supply.
The electric motor supplies the energy required to rotate the saw blade. Reliable motor operation is essential for achieving consistent cuts and using the machine under the conditions specified by the manufacturer.
Certain symptoms may indicate a mechanical or electrical problem:
These symptoms do not necessarily mean that the motor needs replacing. They may also be caused by a power supply issue, an electrical component or a mechanical fault.
If smoke, a burning smell or unusual noises occur, stop the machine immediately and unplug it.
Finding a motor or motor component for the Redstone TS10J requires careful verification of the original part number and technical specifications.
Some electric motors used in table saws are equipped with carbon brushes. These components transfer electrical current to the rotating parts of the motor.
Where fitted, carbon brushes may gradually wear out through regular use.
Starting difficulties, irregular operation or excessive sparking may sometimes be associated with worn carbon brushes.
Before searching for carbon brushes for a Redstone table saw, it is essential to confirm that the motor concerned actually uses this type of component.
The dimensions, shape, connection type and characteristics of the carbon brushes must match the manufacturer's specifications.
We do not recommend choosing carbon brushes based solely on their appearance or approximate dimensions.
The rip fence is an important component for making accurate longitudinal cuts on a table saw.
It helps maintain a consistent distance between the blade and the edge of the wooden workpiece during ripping operations.
A damaged, incorrectly aligned or poorly locking table saw rip fence may affect both cutting accuracy and operator safety.
Common problems may include:
Before considering replacement, check the adjustments described in the machine's instruction manual.
If the fence cannot be securely locked or is significantly damaged, the machine should not be used in that condition.
A mitre gauge is an accessory used on many table saws to make crosscuts and cuts at selected angles.
It generally slides along a slot in the saw table and helps position the workpiece as it passes the blade.
A worn, bent or incorrectly adjusted mitre gauge may lead to inaccurate cuts.
Before looking for a mitre gauge for the Redstone TS10J, check the dimensions of the guide system, the shape of the table slot and the mounting characteristics.
A universal mitre gauge is not necessarily compatible with every table saw.
It is also important to follow the cutting procedures recommended by the manufacturer to avoid workpiece binding and kickback hazards.
The blade height adjustment system allows users to adapt the cutting depth to the thickness of the material being worked.
On machines equipped with a tilting mechanism, it is also possible to make bevel cuts.
These mechanisms may include various mechanical components such as handwheels, handles, shafts, screws, nuts and locking devices.
Over time, sawdust accumulation or mechanical damage may cause:
Suitable cleaning and inspection of accessible mechanisms may sometimes resolve certain problems.
However, if a component is broken or an adjustment cannot be safely secured, appropriate repairs are necessary before the machine is used again.
The riving knife and blade guard are essential safety components on a table saw.
The riving knife helps prevent the saw kerf from closing behind the blade and reduces certain kickback risks.
The upper blade guard helps limit exposure to the rotating saw blade.
A bent, incorrectly positioned or incompatible riving knife may compromise the safety of the machine.
Similarly, a broken blade guard or damaged mounting mechanism must be repaired or replaced with a suitable component.
Never bypass or remove safety devices to continue working with a defective machine.
The compatibility of protective components must be checked particularly carefully, including their dimensions, positioning and operation.
The circular saw blade is a key component in achieving good cutting quality.
A blade suited to the material and intended application can provide more consistent results while reducing unnecessary strain on the machine.
Before selecting a circular saw blade for the Redstone TS10J table saw, it is essential to check the specifications provided in the manufacturer's instruction manual.
The main characteristics to verify include:
Never use a blade with broken teeth, cracks or visible deformation.
Blade replacement must be performed with the machine unplugged, following the manufacturer's installation and tightening instructions.
Blade flanges help secure the circular saw blade to the machine's shaft.
Their condition is essential for ensuring proper blade mounting and limiting abnormal vibrations.
A bent, damaged or unsuitable flange may cause incorrect blade positioning.
When replacing a fastening component, it is essential to respect the original dimensions and specifications.
In particular, the diameters, contact surfaces and tightening arrangements must be checked.
Improvised fastening methods or incompatible components may create serious risks when the blade rotates.
If the blade has abnormal play or cannot be securely fastened, the machine must remain out of service until it has been repaired.
A Redstone TS10J table saw that will not start may be affected by several different faults.
Possible causes include:
Before any inspection, unplug the machine and check only accessible components where such checks are permitted by the manufacturer.
If the fault involves wiring, the motor or an internal electrical component, diagnosis should be carried out by a qualified person.
Replacing a part without identifying the cause of the fault may result in unnecessary expense.
A cut that is no longer straight or consistent may have several possible causes.
Incorrect rip fence alignment, an unsuitable saw blade or an adjustment problem may affect cutting accuracy.
Points to check include:
All inspections must be performed with the machine unplugged and in accordance with the instruction manual.
If a guiding or adjustment component is damaged, it must be repaired before cutting operations resume.
To order a compatible spare part for the Redstone TS10J table saw, it is important to verify the exact identification of the machine.
The model reference is generally indicated on the identification plate or in the original documentation.
Before selecting a replacement component, we recommend checking:
Two table saws from different brands may look similar while using completely different components.
For this reason, we do not recommend choosing a replacement part solely because it resembles the original component.
Regular maintenance helps preserve the cutting accuracy and reliable operation of your Redstone TS10J table saw.
Sawdust and cutting debris may accumulate underneath the table, around adjustment mechanisms and inside accessible areas of the machine housing.
Maintenance operations may include:
All maintenance operations must be performed with the machine switched off and unplugged, after the blade has come to a complete stop.
It is also important to follow the manufacturer's recommendations regarding cleaning, lubrication and adjustment procedures.
When a table saw develops a fault, purchasing a new machine is not always necessary.
If the problem involves a replaceable component and a compatible spare part is available, repairing the machine may help extend its useful life.
This approach offers several potential advantages:
However, repairs must remain technically feasible and must never compromise the machine's safety devices.
Complex repairs, particularly those involving electrical components and protective mechanisms, should be carried out by qualified personnel.
At Probois Machinoutils, we offer a selection of spare parts for numerous machines used in woodworking, DIY and workshop applications.
Our catalogue includes several categories dedicated to Redstone equipment, a brand notably distributed through Leroy Merlin.
You can also find spare parts categories for other Redstone machines, including sliding mitre saws, plunge saws, vacuum cleaners, compressors and generators.
We also supply spare parts for equipment from brands such as Scheppach, Holzmann, Bernardo, Parkside, Dexter, Mac Allister, Kity and many others.
Our aim is to make it easier to find suitable replacement components so that users can maintain and repair their equipment whenever possible.
Our selection of Redstone TS10J spare parts may change depending on manufacturer availability and the product references listed in our catalogue.
Are you looking for a spare part for your Redstone TS10J table saw to replace a worn, broken or defective component? Browse the products available in this category.
Before placing an order, carefully check the product description, technical specifications and compatibility information provided.
Correctly identifying the required component helps reduce ordering mistakes and makes repairing your machine easier.
With Probois Machinoutils, discover a selection of spare parts for maintaining and repairing your Redstone machines and many other types of workshop equipment.