Knife protection reference 3904409010 for chipper shredder Scheppach GS60
Knife protection reference 3904409010 for chipper shredder Scheppach GS60
Knife protection reference 3904409010 for chipper shredder Scheppach GS60
Adjustment screw mark 48 reference 3904409034 for Parkside PWH2800B2 vegetable shredder
Replacement knife 8 teeth for Scheppach plant shredder
Coals 3904409008 for Scheppach and Parkside vegetable shredder
Carbon holder 3904410011 for Scheppach and Parkside vegetable shredder
Carbon brush holder 3904409045 for Parkside PWH 2800 C3 model
Is your Parkside garden shredder no longer working correctly? Does its motor have difficulty starting, or is its cutting mechanism showing signs of wear? Before considering replacing the entire machine, it may be worth looking for a suitable spare part for your Parkside garden shredder.
At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of certain Parkside garden shredders manufactured by Scheppach. Our range includes motor carbon brushes, carbon brush holders, brush supports, shredder cutting blades, protective components and adjustment screws.
Our catalogue covers certain versions of the Parkside PWH 2800 B2 and PWH 2800 C3 garden shredders. However, it is essential to check the compatibility of each replacement part with the exact model and version of your machine before ordering.
A garden shredder is a particularly useful piece of gardening equipment for reducing the volume of branches, hedge trimmings and other suitable garden waste. It makes garden maintenance easier and helps prepare plant material for disposal, composting or other uses, depending on the type of waste.
During operation, several components are subjected to considerable mechanical stress. The cutting mechanism must break down branches and garden waste, while the motor and its associated components drive the shredding system.
Over time, some parts may wear out, become damaged or require replacement. A worn cutting blade can reduce shredding efficiency, while worn motor carbon brushes may interfere with the operation of an electric motor equipped with brushes.
Replacing a faulty component can sometimes extend the service life of your Parkside garden shredder, restore satisfactory operation and avoid the expense of purchasing a completely new machine.
Motor carbon brushes for Parkside garden shredders are electrical components that can gradually wear out on models fitted with brushed electric motors.
These small components maintain electrical contact with the motor commutator. As they wear, various symptoms may appear, including difficult starting, irregular operation or unexpected motor shutdowns.
Our selection includes motor carbon brushes, reference 3904409008, intended for certain compatible Scheppach and Parkside garden shredders.
Before replacing the carbon brushes, it is important to check their reference number, dimensions and compatibility with your machine. A motor fault may also originate from other electrical or mechanical components and should not automatically be attributed to worn brushes.
The carbon brush holder of a Parkside garden shredder plays an important role in keeping the motor brushes correctly positioned. It maintains their alignment to ensure the electrical contact required for motor operation.
A damaged, deformed or poorly connected brush holder may interfere with the machine's operation, even when the carbon brushes themselves remain in good condition.
Our catalogue includes the carbon brush holder, reference 3904409045, intended for the Parkside PWH 2800 C3 garden shredder, as well as the complete carbon brush support, reference 3904410011, for certain compatible Scheppach and Parkside shredders.
Please note that, depending on the reference ordered, the brush support may be supplied without the motor carbon brushes. Always consult the individual product description to check exactly which components are included.
Any work involving electrical components must only be carried out when the machine is disconnected from the power supply and by someone with the necessary technical knowledge.
Some garden shredders feature an adjustment system that allows the cutting mechanism to be set according to the manufacturer's instructions.
The adjustment screw for Parkside garden shredders is therefore an important component for maintaining the correct operation of the relevant cutting mechanism.
Our catalogue includes the adjustment screw, reference 3904409034, corresponding to part number 48 on the Parkside PWH 2800 B2 garden shredder.
This replacement part may be required when the original adjustment screw is damaged, missing or no longer allows the mechanism to be adjusted correctly.
It is essential to follow the operating manual when adjusting the mechanism. Excessive tightening or incorrect positioning may cause premature wear or damage to certain shredder components.
The garden shredder cutting blade is one of the components subjected to the greatest stress during operation. It plays a direct role in breaking down branches and garden waste.
Over time, its cutting edges may become blunt due to friction and repeated cutting forces. Significant wear can result in reduced shredding efficiency, more frequent blockages or increased strain on the drive mechanism.
Our selection includes an 8-tooth shredder cutting blade intended for certain Scheppach models. Its compatibility with a Parkside garden shredder must be confirmed before ordering.
When choosing a replacement blade, compare the manufacturer's part number, dimensions, shape, number of teeth and compatibility information provided on the product page.
A cracked, deformed or seriously damaged cutting blade must be replaced with a suitable component. Removal and installation must be carried out in accordance with the manufacturer's instructions.
Protective components play an important role in the operation and safety of a garden shredder. They help protect certain parts of the cutting mechanism and must remain correctly installed.
This category includes the cutting blade guard, reference 3904409010, identified for certain Scheppach garden shredders, including the GS60 model.
As with the other spare parts in our selection, it is essential to check that the protective component corresponds exactly to your Parkside shredder version before purchasing it.
A broken, missing or incorrectly secured guard must never be ignored. The shredder must not be operated with a missing or damaged safety device.
The Parkside PWH 2800 B2 and PWH 2800 C3 garden shredders are among the models for which certain replacement parts are available in our catalogue.
However, it is important to distinguish between these two versions. Even when machines have similar specifications or appearances, their components are not necessarily interchangeable.
For example, the adjustment screw 3904409034 is identified for the PWH 2800 B2, while the carbon brush holder 3904409045 is offered for the PWH 2800 C3.
These differences demonstrate why it is essential to search for replacement parts using the exact machine reference rather than relying solely on its appearance.
Our Parkside spare parts range focuses on machines manufactured by Scheppach. Other Parkside garden shredder versions are therefore not automatically compatible with the components presented in this category.
Before ordering a replacement part for your Parkside garden shredder, we recommend checking the information shown on the machine's identification plate.
To minimise compatibility errors, pay particular attention to the following information:
Consulting the Parkside garden shredder exploded parts diagram, when available, can be particularly helpful in identifying the correct component using its position number.
If you are unsure, it is preferable to verify this information before ordering to avoid purchasing an incompatible replacement part.
Several warning signs may indicate that a component of your garden shredder needs inspection or replacement.
Reduced shredding efficiency may be caused by wear in the cutting mechanism, incorrect adjustment or the use of garden waste that is unsuitable for the machine's capacity.
Starting difficulties, intermittent shutdowns or irregular operation may indicate problems with certain electrical components, including motor carbon brushes on models equipped with them.
Unusual noises, excessive vibration or drive problems should also prompt the operator to stop the machine and investigate the cause before using it again.
It is important to remember that a symptom does not always identify the faulty component with certainty. An appropriate diagnosis is necessary before replacing parts.
Regular maintenance helps preserve the performance of your Parkside electric garden shredder and reduce premature component wear.
Before each use, check the overall condition of the machine, ensure all protective guards are present and verify that no foreign objects are trapped in the shredding area.
It is also important to respect the maximum branch diameter specified by the manufacturer and never introduce stones, metal objects or other unsuitable materials into the shredder.
After use, switch off the machine, disconnect it from the electrical supply and wait until the cutting mechanism has stopped completely before carrying out any cleaning operations authorised by the manual.
Accumulated plant debris should be removed according to the manufacturer's recommendations to reduce the risk of blockages and maintain the correct operation of the cutting mechanism.
The shredder should be stored in a dry place protected from excessive moisture. Worn or damaged components must be replaced with compatible spare parts.
At Probois Machinoutils, we specialise in machinery and replacement parts, particularly components for Scheppach equipment and Parkside machines manufactured by Scheppach.
Our selection allows customers to find different replacement part references required for the maintenance or repair of certain Parkside garden shredders.
Depending on the model and availability, we offer motor carbon brushes, carbon brush supports, brush holders, adjustment screws, cutting blades and protective components.
Our catalogue evolves according to the references offered by manufacturers and the needs of users. Each product page provides the available information to help identify the correct replacement component.
By choosing to replace a faulty component whenever repair is possible, you can extend the service life of your gardening equipment and avoid prematurely replacing the entire machine.
Whether you are looking for motor carbon brushes for a Parkside shredder, a carbon brush holder for the PWH 2800 C3, an adjustment screw for the PWH 2800 B2 or another component of the shredding mechanism, explore our selection of replacement parts for compatible models.
Before ordering, take the time to check the exact reference of your machine and the specifications of the required component.
Probois Machinoutils offers an evolving range of spare parts for Parkside garden shredders manufactured by Scheppach, helping you maintain, repair and extend the service life of your gardening equipment.