Air filter for Zipper ZI-COM24E and ZI-COM50E compressor
Air filter for Zipper ZI-COM24E and ZI-COM50E compressor
Air filter for Zipper ZI-COM24E and ZI-COM50E compressor
40 mm pressure gauge for Zipper compressor Zi-COM24(E/Si) and Zi-COM50(E/Si), Zi-COM150
Regulator for Zipper Zi-COM24(E/Si) and Zi-COM50(E/Si) compressor
Release pipe for compressor Zipper ZI-COM50E and Zi-COM24E
Single valve for compressor Zipper ZI-COM50E and Zi-COM24E
Quick coupling for Scheppach, Woodster and Parkside compressor corresponding to item 57 or 58 according to the exploded views
Bleed screw ZI-10003185 for different Zipper compressors
Safety valve for compressor Zipper ZI-COM24E, Zipper ZI-COM50E, Zipper ZI-COM100-2V5
Valve plate for Scheppach, Woodster and Parkside compressors
Connector n° 20 for compressor Zipper ZI-COM50E and Zi-COM24E
Pressure switch for compressor Zipper Zi-COM24E et Zi-COM50E
50 mm pressure gauge for Zipper Zi-COM24(E/Si) and Zi-COM50(E/Si) compressors
Wheel for compressor Zipper Zi-COM50E
The Zipper ZI-COM50E air compressor is a practical workshop machine designed to produce and store compressed air for various DIY, maintenance and pneumatic applications. With its 50-litre air tank, 1100 W electric motor and oil-lubricated compression system, it offers a versatile solution for home workshops, garages and users requiring a reliable supply of compressed air for compatible pneumatic accessories.
Like any mechanical equipment, an air compressor requires regular maintenance to preserve its performance. Over time, certain components may wear out, become clogged or develop sealing problems. A defective part can lead to pressure loss, difficult starting or a reduction in the amount of compressed air available.
At Probois Machinoutils, we offer a dedicated category for Zipper ZI-COM50E air compressor spare parts, making it easier to identify the components needed to maintain and repair your equipment.
Whether you are looking for an air filter, a pneumatic fitting or a specific replacement component, it is essential to check the exact part reference before ordering.
The Zipper ZI-COM50E is a direct-drive, single-cylinder air compressor equipped with an oil-lubricated compression system. It operates on a 230 V, 50 Hz electrical supply and has a motor rated at 1100 W, equivalent to 1.1 kW.
Its horizontal 50-litre tank provides a compressed air reserve for operating pneumatic accessories compatible with the machine's performance.
The main technical specifications include:
The compressor also features two pressure gauges for monitoring tank pressure and working pressure, a pressure regulation system, a condensate drain valve underneath the tank and connections for pneumatic accessories.
Its wheeled frame and transport handle make it easier to move around a garage or workshop.
When using a Zipper 50-litre air compressor, it is important to distinguish between the air intake capacity and the actual airflow available to power pneumatic tools.
The ZI-COM50E has a stated air intake capacity of 165 litres per minute. This figure does not represent the amount of compressed air delivered at the outlet when the compressor operates under pressure.
According to the manufacturer's specifications, the available airflow varies with working pressure:
These figures are important when determining whether the compressor can properly supply an air blow gun, tyre inflator, pneumatic stapler or another compatible accessory.
A tool requiring excessive airflow may cause the pressure to drop rapidly, even when the compressor is operating normally.
Before searching for a replacement part to solve a performance problem, it is therefore advisable to check the air consumption of the connected equipment.
The air filter for the Zipper ZI-COM50E compressor helps protect the compression mechanism against dust and certain impurities present in the surrounding air.
During operation, the compressor draws in outside air before compressing it and storing it inside its 50-litre tank. If the air contains a large amount of dust, particles can gradually accumulate in the filter element.
A heavily clogged filter may restrict air intake and contribute to reduced tank-filling performance.
In woodworking, mechanical and DIY workshops, it is particularly important to inspect this component regularly, especially when the machine operates in a dusty environment.
The air filter must be replaced with a model whose specifications and reference are compatible with the ZI-COM50E.
Operating the compressor without its original air filtration system is not recommended.
The air filter should be inspected periodically to check its general condition and the level of accumulated dirt.
Several signs may indicate that replacement is necessary:
The replacement frequency depends on operating conditions and the manufacturer's recommendations.
Regular filter maintenance helps preserve the compression system and reduce the risk of premature wear.
Unlike the oil-free silent compressors in the Zipper range, the ZI-COM50E uses an oil-lubricated compression system.
This design requires regular monitoring of lubrication to ensure the mechanical components continue to operate correctly.
An insufficient oil level or the use of unsuitable oil can contribute to overheating and accelerate wear inside the compression mechanism.
It is therefore recommended to:
Before performing any maintenance, the compressor must be switched off, unplugged and placed in the safe condition specified by the manufacturer.
This model should not be confused with the Zipper ZI-COM50SI, which belongs to the silent oil-free compressor range and has different maintenance requirements.
A Zipper ZI-COM50E compressor that no longer builds pressure correctly may have several different problems, some of which can be related to a worn or malfunctioning component.
Possible causes include:
It is also important to distinguish abnormal pressure loss from air consumption exceeding the machine's capabilities.
If the compressor runs continuously without reaching its usual pressure, a proper diagnosis is required before ordering a replacement part.
Work on pressurised components must only be carried out after the system has been completely depressurised and in accordance with the manufacturer's safety instructions.
A starting problem on the Zipper ZI-COM50E can have several electrical or mechanical causes.
Before considering motor replacement, the possible causes should be investigated without carrying out unsafe operations.
Components that may be involved include:
The ZI-COM50E includes a starting assistance system and motor protection. Any starting fault should therefore be diagnosed with these features in mind.
It is advisable to consult the operating manual and entrust electrical repairs to a suitably qualified person.
During air compression, moisture present in the atmosphere may condense inside the air receiver.
This water can gradually accumulate inside the 50-litre tank of the Zipper ZI-COM50E compressor.
The model features a drain valve underneath the tank, allowing condensation to be removed according to the manufacturer's instructions.
Regular draining helps reduce the risk of internal corrosion and preserve the condition of the air receiver.
This operation must be carried out in accordance with safety instructions concerning machine shutdown and residual pressure.
A tank showing significant corrosion, deformation or deterioration must be inspected by a qualified professional.
Never attempt to repair a pressure vessel by welding or making unauthorised modifications.
The Zipper ZI-COM50E compressor is equipped with two pressure gauges for displaying tank pressure and working pressure.
These instruments help users monitor machine operation and adjust the pressure to suit pneumatic accessories.
A pressure gauge that is damaged, unreadable or displaying inconsistent values may require inspection or replacement.
The pressure control system also plays a role in the compressor's automatic operation.
When a pneumatic component needs replacing, several characteristics must be checked:
Safety and pressure regulation devices must never be modified to exceed the maximum pressure of 8 bar specified for this compressor.
When ordering a spare part compatible with the Zipper ZI-COM50E, it is important to start by identifying your machine accurately.
The identification plate generally allows you to confirm the model and record useful information for finding replacement components.
We recommend the following procedure:
This approach helps prevent ordering errors, particularly when several Zipper compressor models have visually similar components.
A photograph of the original part may also help with identification.
The Zipper ZI-COM50E and ZI-COM24E compressors belong to the same family of oil-lubricated air compressors.
They share certain technical characteristics, including 1100 W motor power, a maximum pressure of 8 bar and a stated air intake capacity of 165 litres per minute.
Their main difference concerns tank capacity: 50 litres for the ZI-COM50E compared with 24 litres for the ZI-COM24E.
Some spare part references may be shared between the two machines. However, compatibility must never be assumed without verification.
The dimensions of mounting components, connections, tank fittings and certain mechanical parts may differ.
Before ordering a component for either model, it is essential to check its exact reference in the manufacturer's technical documentation.
A 50-litre air compressor combines electrical components, a compression mechanism and a tank containing air under pressure.
Maintenance and repair operations therefore require appropriate precautions.
Before any intervention, the compressor must be switched off, disconnected from the electrical supply and completely depressurised according to the manufacturer's recommendations.
Never dismantle a fitting or pneumatic component while the system is still pressurised.
Electrical components must only be handled by people with the necessary qualifications.
Safety devices, motor protection systems and pressure regulation components must never be bypassed.
If there is any doubt about the condition of the air tank or the safety of a component, the machine should be inspected by a qualified professional.
When a Zipper ZI-COM50E compressor develops a fault, replacing the entire machine is not always necessary.
If the malfunction is caused by an identifiable and replaceable component, purchasing a compatible spare part may provide an economical solution.
Replacing a damaged air filter, a defective fitting or another worn component may extend the compressor's service life, provided that the diagnosis is correct and the repair is technically feasible.
This approach also helps avoid prematurely replacing equipment whose other components remain in good working condition.
However, the cost of repair, spare part availability and the overall condition of the machine must be considered.
Problems affecting safety devices, electrical components or the pressurised air receiver may require professional intervention.
At Probois Machinoutils, we help private customers and professional users find spare parts for their workshop equipment.
This category is specifically dedicated to spare parts for the Zipper ZI-COM50E 50-litre air compressor.
Our aim is to make it easier to identify compatible components so that you can maintain and repair your machine whenever the required parts are available.
Our spare parts catalogue may change depending on the references offered by the manufacturer and the possibilities for sourcing them.
If you are looking for a component that does not appear in this category, you can provide us with your compressor's exact model reference, serial number and, if possible, the part number shown on the exploded diagram.
This information will help us check supply possibilities with the manufacturer and investigate a suitable replacement solution when one is available.
Explore our selection of Zipper ZI-COM50E air compressor spare parts and find suitable components to maintain, repair and extend the service life of your 50-litre oil-lubricated air compressor.