Bleed screw ref ZI-10003185 for compressor Zipper
Bleed screw ZI-10003185 for different Zipper compressors
Bleed screw ZI-10003185 for different Zipper compressors
Oil level plug for Scheppach compressors, mark 20 on the exploded view and Zipper ZI-COM100-2V5
Safety valve for compressor Zipper ZI-COM24E, Zipper ZI-COM50E, Zipper ZI-COM100-2V5
Connector Scheppach 5906103037 or référence 5906112023 for Scheppach compressors
Coupling and elbow for various Scheppach compressors mark 40 in the exploded view
Coupling and elbow for Zipper ZI-COM100-2V5
Pressure regulator Scheppach ref 3906126024 or 5906101071 or 3906129016 for compressor Scheppach, Parkside, Zipper
Air filter for various Scheppach compressors
Pressure switch for Scheppach, Zipper and Parkside compressors
Valve plate for Scheppach, Woodster and Parkside compressors
Cylinder head gasket for various Scheppach, Zipper and Parkside compressors
Head gasket for Scheppach and Parkside compressors (Exhibit 4 on the exploded view) and for Zipper ZI-COM100-2V5
Wheel for compressor Zipper Zi-COM100-2V5
200µf 250VAC wire leaded starting capacitor for Zipper compressor ZI-COM100-2V5 for example
Set of 2 air filters reference Scheppach 5906101036 and oil cap reference 17 reference 5906101017 for different compressors
Capacitor 65uf - 450V special start-up machine
Valve for many Scheppach, Parkside and Woodster compressors (old reference 5906103043)
This 40 mm diameter pressure gauge is mounted on various Scheppach, Dexter and Aircase or Airbox compressors!
200µf 250VAC wire leaded starting capacitor for Zipper compressor ZI-COM100-2V5 for example
The Zipper ZI-COM100-2V5 air compressor is designed to produce compressed air for various applications in workshops, garages and maintenance environments. It can supply different pneumatic accessories, provided that their air consumption and operating pressure are compatible with the compressor's specifications.
Like any air compressor, the Zipper ZI-COM100-2V5 contains mechanical, electrical and pneumatic components that may wear out or become damaged over time. Reduced pressure, starting difficulties, air leaks or unusual noises may indicate that certain parts need to be inspected.
At Probois Machinoutils, we offer a selection of spare parts for the Zipper ZI-COM100-2V5 air compressor to help you maintain your equipment and replace defective components.
This category includes air filters, capacitors, cylinder head gaskets, pressure regulators, safety valves, pneumatic fittings, oil plugs and transport wheels. Each replacement part must be selected according to its reference number and compatibility with your particular compressor version.
The air filter for the Zipper ZI-COM100-2V5 compressor plays an essential role in protecting the compression mechanism. It helps prevent dust and airborne particles from entering the system.
In woodworking workshops, garages or dusty environments, the filter can gradually become clogged. When airflow is restricted, the compressor may become less efficient and take longer to fill its air tank.
A heavily obstructed air filter may also increase the operating load on the compression unit.
We offer an air filter for the Zipper ZI-COM100-2V5, reference Zipper 10000887, also identified under Scheppach reference 5906101036 for certain compatible machines.
We recommend regularly checking the condition of the air filter and replacing it when it becomes damaged or too clogged to perform its function correctly.
The compressor must not be operated without the filtration components specified by the manufacturer.
The starting capacitor for the Zipper ZI-COM100-2V5 compressor is one of the electrical components that may be involved in the operation of its single-phase motor.
A defective starting capacitor can cause difficulties when starting the motor, a humming noise without the motor turning or abnormal electrical behaviour.
However, these symptoms may also result from other problems, including insufficient electrical supply, a faulty control device or mechanical blockage.
Our catalogue includes 200 µF starting capacitors rated at 250 VAC, available with different connection types depending on the version.
It is important to distinguish between a capacitor fitted with connecting wires and one equipped with terminals. The electrical specifications and connection system must match those of the original component.
Before ordering a starting capacitor, carefully check its capacitance, rated voltage, type, dimensions and mounting arrangement.
Capacitors can retain an electrical charge even after the power supply has been disconnected. Their inspection and replacement should be carried out by a qualified person.
The run capacitor for a Zipper air compressor is another important electrical component on motors equipped with this type of capacitor.
Unlike a starting capacitor, a run capacitor is designed to remain connected to the electrical circuit during normal motor operation, depending on the motor's design.
A defective run capacitor may cause reduced performance, abnormal overheating or operating difficulties.
In this category, you can find 60 µF and 65 µF capacitors rated at 450 VAC, with specific connection and mounting characteristics.
These capacitors are not interchangeable simply because they have a similar external appearance.
The capacitance expressed in microfarads, rated voltage, capacitor type and connection specifications must all be checked before replacement.
The cylinder head gasket for the Zipper ZI-COM100-2V5 compressor helps maintain an airtight seal between the relevant components of the compression unit.
Its purpose is to ensure proper sealing between the mating surfaces and reduce compressed air leakage during operation.
When a cylinder head gasket becomes damaged, an air leak may occur and affect the compressor's performance.
Possible symptoms include slower pressure build-up, reduced efficiency or an air leakage noise around the cylinder head.
We offer a cylinder head gasket compatible with the Zipper ZI-COM100-2V5 compressor, which may also be suitable for certain machines from other manufacturers according to the compatibility information provided in the individual product descriptions.
Replacing a gasket requires following the disassembly and reassembly procedures specified by the manufacturer.
The contact surfaces must be clean and in good condition. Fasteners must be tightened according to the machine's technical specifications.
The pressure regulator for a Zipper air compressor allows the outlet pressure to be adjusted according to the requirements of the pneumatic accessory being used.
Not all compressed air tools require the same operating pressure.
The regulator makes it possible to select an appropriate pressure within the compressor's operating limits.
If the regulator becomes difficult to adjust, develops an air leak or no longer maintains the selected pressure correctly, its condition should be inspected.
Our selection includes a Zipper pressure regulator, reference ZI-10001817, also associated with certain Scheppach and Parkside references.
Before ordering, check the regulator's reference number, connections and specifications against those of the original component.
The safety valve for the Zipper ZI-COM100-2V5 compressor is an essential part of the compressed air system's protective equipment.
It is designed to operate when the pressure reaches the release conditions specified by the manufacturer.
A defective safety valve may compromise the protection of the system. It must therefore never be removed, blocked or replaced with a component that does not meet the machine's specifications.
Our catalogue includes a safety valve compatible with several Zipper air compressors, including the ZI-COM24E, ZI-COM50E and ZI-COM100-2V5 models.
Before replacing a safety valve, it is essential to verify its pressure specifications, connection type and exact compatibility.
Work on safety devices must be performed by a competent person in accordance with the manufacturer's instructions.
The pneumatic fittings for the Zipper ZI-COM100-2V5 compressor connect the different components of the compressed air circuit.
They must provide reliable, airtight connections to minimise pressure losses during operation.
A cracked, deformed or damaged fitting can cause an air leak and increase the time required to fill the compressor's air tank.
We offer a Zipper fitting and elbow set, reference ZI-10010470, for the ZI-COM100-2V5 compressor.
Before replacing a fitting, compare its shape, thread, dimensions and position with those of the original part.
Connections must be assembled using suitable sealing methods and in accordance with the manufacturer's recommendations.
The oil level plug for the Zipper ZI-COM100-2V5 compressor is one of the components involved in checking and maintaining the machine's lubrication system.
Depending on the compressor's design, these plugs are used to close openings intended for oil level checks or maintenance operations.
A damaged, cracked or leaking plug should be replaced with a suitable component.
Our selection includes an oil level plug compatible with the Zipper ZI-COM100-2V5, also offered for certain Scheppach air compressors.
Before performing any maintenance, consult the instruction manual for the manufacturer's recommendations regarding oil level checks and servicing procedures.
The lubricant type, quantity and maintenance intervals must correspond to the machine's technical specifications.
The drain screw for a Zipper air compressor allows condensation water that accumulates inside the compressed air tank to be removed.
When ambient air is compressed, some of the moisture it contains may condense and collect at the bottom of the tank.
Regular draining helps prevent excessive moisture accumulation and reduces the risk of internal corrosion.
We offer a Zipper drain screw, reference ZI-10003185, with a stated diameter of 16.6 mm, intended for various Zipper air compressors.
It is essential to check the compatibility of this drain screw with your machine before ordering.
Draining must be carried out in accordance with the manufacturer's safety instructions. A damaged drain screw or one that no longer seals correctly can cause pressure loss.
The transport wheels for the Zipper ZI-COM100-2V5 compressor make it easier to move the machine around a workshop or garage.
A cracked, deformed or heavily worn wheel can make transportation difficult and affect the compressor's stability.
Our catalogue includes a Zipper transport wheel, reference 10001831, item 58 in the ZI-COM100-2V5 exploded parts diagram.
To select the correct replacement part, check the reference number, dimensions and mounting system.
Replacing a worn wheel helps maintain the machine's mobility, particularly when the compressor needs to be moved regularly.
A Zipper ZI-COM100-2V5 air compressor that no longer starts may be affected by several different faults.
Possible causes include:
If the motor produces a humming noise without starting, it should not automatically be assumed that the capacitor is responsible.
The electrical supply and relevant components must be checked to identify the exact cause of the problem.
If the machine trips the circuit breaker, produces a burning smell or shows signs of overheating, it must be switched off and disconnected until the fault has been identified.
When the Zipper ZI-COM100-2V5 compressor no longer builds pressure correctly, several components may be involved.
A heavily clogged air filter can restrict the amount of air entering the compression system.
A damaged cylinder head gasket can cause air leakage and reduce the machine's performance.
An air leak from a fitting, pipe or drain screw may also prevent the tank from maintaining pressure correctly.
The operation of the relevant control devices and pneumatic components should also be checked, following the instructions provided in the manual.
Before replacing any part, we recommend identifying the exact source of the problem. An air leak and a compression fault may produce similar symptoms but require different repairs.
Regular maintenance helps preserve the performance and service life of your Zipper ZI-COM100-2V5 air compressor.
Several maintenance operations should be performed at the intervals and according to the procedures specified in the manufacturer's instruction manual:
The compressed air tank is an essential safety component. It must never be drilled, welded or modified in an attempt to repair damage.
Before carrying out maintenance or repairs, the compressor must be disconnected from the electrical supply and the compressed air system must be fully depressurised according to the manufacturer's instructions.
To order a spare part compatible with your Zipper ZI-COM100-2V5 compressor, it is important to collect the information shown on the machine's identification plate.
The exact model reference, serial number and manufacturing period may be required to identify the correct replacement component.
We recommend following these steps:
Some parts may be shared by several Zipper, Scheppach, Parkside or Woodstar air compressors. However, compatibility must be confirmed for each individual reference.
BEFORE PURCHASING, PLEASE CHECK THE LIST OF MACHINES COMPATIBLE WITH THE REQUIRED SPARE PART. Differences may exist depending on the month or year of manufacture and the serial number of your compressor.
When an air compressor develops a fault, replacing the entire machine is not always necessary.
If the malfunction is caused by a replaceable component, purchasing a replacement part for the Zipper ZI-COM100-2V5 compressor may provide an economical solution.
Replacing a defective air filter, cylinder head gasket, pneumatic fitting, pressure regulator or capacitor may restore the machine to working condition, provided that the fault has been correctly diagnosed.
This approach helps extend the equipment's service life and avoid prematurely replacing a machine that can still be repaired.
However, work involving electrical components, safety devices or pressurised parts should be entrusted to a qualified person.
At Probois Machinoutils, we offer spare parts for maintaining and repairing a wide range of workshop equipment, including Zipper air compressors.
This category is dedicated to the Zipper ZI-COM100-2V5 compressor and brings together various components designed to facilitate its maintenance.
Here you can find air filters, starting capacitors, run capacitors, cylinder head gaskets, safety valves, pressure regulators, fittings, oil plugs, drain screws and transport wheels.
Our selection of spare parts may change depending on manufacturer availability and customer requirements.
If you are looking for a component that is not listed in our catalogue, you can provide us with the exact model reference of your machine, its serial number and, if possible, the item number shown in the exploded parts diagram.
This information will help identify the required component and check whether it can be supplied.
Explore our selection of spare parts for the Zipper ZI-COM100-2V5 air compressor and find the right components to maintain, repair and extend the service life of your equipment.