Abrasive belt 1220x150 mm grit 60 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 80 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 120 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 180 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Hook and Loop disc diameter 230 mm grit 120 for sander polishers, orbital sander
Hook and Loop disc diameter 230 mm grit 80 for sander polishers, orbital sander
Hook and Loop disc diameter 225 mm grit 80 for sander polishers, orbital sander
Hook and Loop disc diameter 230 mm grit 120 for sander polishers, orbital sander
Table support reference 10002990 for belt sander
Switch for Holzmann Holzmann BT1220 and Bernardo BDMS230 sanders
Special wire capacitor for machine start-up, power 100µf, 275VAC
Belt for belt and disc sander
Motor pulley for belt and disc sander
Drive roller for Holzmann BT1220 belt and disc sander
Tension roller for Holzmann BT1220 belt and disc sander
Holzmann is a well-known brand in the woodworking and metalworking machinery sector. Recognised for the robustness and quality of its equipment, the brand provides solutions for professionals, craftsmen and demanding DIY users. Its extensive range includes numerous stationary woodworking machines, including belt and disc sanders.
Among these machines, the Holzmann BT1220 is a stationary sander combining a 1220 x 150 mm sanding belt with a Ø228 mm sanding disc. Its robust construction and cast-iron base make it particularly suitable for regular sanding work in the workshop.
This category includes spare parts for the Holzmann BT1220 belt and disc sander, helping you maintain, repair and extend the service life of your machine.
A belt and disc sander contains numerous mechanical and electrical components that may naturally wear over the years.
A drive belt may stretch or deteriorate, a bearing may develop excessive play, a switch may become faulty or a mechanical component may become damaged after intensive use.
Replacing the affected part can often restore the machine to proper working condition without having to replace the complete sander.
Our range of Holzmann BT1220 spare parts is regularly expanded to provide progressively more solutions for maintaining and repairing this sander.
The Holzmann BT1220 combines two sanding systems in a single machine: a long abrasive belt and a sanding disc.
Both functions depend on different mechanical components that must remain in good condition to ensure smooth and reliable operation.
Depending on the references available, you may find various types of spare parts, including:
drive belts;
bearings;
pulleys and drive wheels;
switches;
electrical components;
supports and guides;
adjustment components;
mounting hardware;
mechanical components.
The range may evolve as new spare parts are progressively added to our catalogue.
The drive belt plays an important role in the operation of the sander.
It transmits power from the motor to the machine's mechanical components. Over time, a drive belt may stretch, crack, lose its grip or eventually break.
A worn belt can result in reduced performance, unusual noises or a complete loss of drive.
It is therefore advisable to inspect its condition regularly and replace it when signs of wear become visible.
However, the mechanical drive belt should not be confused with the 1220 x 150 mm abrasive sanding belt used directly for sanding wood. These are two completely different components with different functions.
Bearings ensure the smooth rotation of the various shafts and moving components inside the sander.
With regular use, they can gradually wear, develop excessive play or become noisy.
A damaged bearing can cause vibrations, unusual noises or irregular rotation. Replacing it promptly can help prevent premature wear of other associated components.
Other mechanical parts for the Holzmann BT1220 may also need to be replaced following normal wear, accidental damage or intensive use.
Electrical components may also require replacement during the service life of the machine.
A Holzmann BT1220 switch, cable, motor or another electrical component can develop a fault after several years of use.
Before replacing an electrical component, it is important to accurately identify the cause of the problem and check the specifications of the original part.
For safety reasons, any work on electrical components must be carried out with the machine disconnected from the power supply and, where necessary, by a qualified person.
Regular maintenance helps preserve the performance and extend the service life of your Holzmann BT1220 belt and disc sander.
Wood dust generated during sanding can accumulate around mechanical components, guiding systems and other areas of the machine.
It is therefore advisable to clean the sander regularly and inspect the condition of its moving parts.
Particular attention should be paid to the tension and tracking of the sanding belt, bearings, adjustment mechanisms and drive components.
Unusual vibrations, abnormal noises, reduced performance or irregular operation may be early signs of a worn or faulty component.
A fault or damaged component does not necessarily mean that the complete sander needs to be replaced.
The Holzmann BT1220 is a robust stationary machine with many components that can be replaced individually.
Replacing a drive belt, bearing, switch or damaged mechanical component can often restore the machine to working condition at a significantly lower cost than replacing the complete sander.
The availability of Holzmann BT1220 spare parts therefore helps extend the useful life of your machine.
Before ordering a replacement part, it is important to accurately identify the component you need.
If you have the instruction manual or exploded parts diagram for your sander, locate the item number corresponding to the required part.
You can then compare this number with the information provided on the spare part product page.
We also recommend checking the information on the machine identification plate, including the exact model and, where necessary, its serial number and production period.
The Holzmann BT1220 and Holzmann BT1220TOP are two different models.
Although their names are similar and both machines combine an abrasive belt with a sanding disc, their specifications and some of their components are different.
A spare part designed for a BT1220TOP is therefore not automatically compatible with a BT1220, and vice versa.
Always check the exact model shown on your machine's identification plate before ordering a replacement part.
IMPORTANT: BEFORE PURCHASING, always check that your machine is included in the list of compatible machines provided on the spare part product page.
A component that looks identical or very similar to the one fitted to your sander is not necessarily compatible.
Dimensions, mounting points, electrical specifications or the design of a component may vary depending on the machine model and production period.
When this information is specified on the product page, also check the month and year of manufacture and the serial number of your machine before ordering.
Our range of spare parts for the Holzmann BT1220 sander is regularly expanded with new references.
Our aim is to progressively offer the main components required to maintain and repair this machine, including drive belts, bearings, switches, electrical components, mechanical parts, adjustment elements and other replacement components.
If the part you need is not yet available in our catalogue, identify, whenever possible, its item number on the Holzmann BT1220 exploded parts diagram.
This information makes it much easier to identify the correct replacement component.
Repairing a machine rather than replacing it helps extend its useful life while allowing you to continue working with equipment you already know.
With our range of Holzmann BT1220 spare parts, you can replace worn or damaged components and keep your belt and disc sander in good working condition.
Whether you need a drive belt, bearing, switch or another mechanical component, our catalogue is regularly expanded to provide more solutions for maintaining and repairing your Holzmann BT1220 belt and disc sander.
