Triangular abrasives, velcro system, grain 80 for sanding plate for multifunction tools.
Set of 2 mounting brackets with screws for Scheppach UMF1600 and UMF2000 miter saw bracket and Parkside model
Abrasive belt grit 100 in a professional quality for drum sander width 560 mm
Pinion reference 20 for jointer table on various Kity, Scheppach and Woodster machines
Lateral bearings for various Kity and Scheppach band saws
TCT circular saw blade diameter 700 mm with chip limiter specially for log saw
The dust collector Holzmann ABS1500FF is equipped with an FP1 filter cartridge! It has a 750W motor and a suction power of 1500 m³ / h. Its constant suction power will allow you to work easily!
Clamp Piher depth 120 mm length 1000 mm
Light plate for Decoflex and Kity SAC405F scroll saw
Belt protector 5911274005 for Scheppach and Woodster lawn mowers
Set of 4 plastic soles reference 5905303022 for various log splitters 7 tons Scheppach or Woodster
Abrasive belt grit 240 in a professional quality for drum sander width 560 mm
TCT circular saw blade diameter 235 mm 24T for electrical Hand Machines
Bandsaw blade length 2180 mm for different machines as Rondy 750
Cork for the flywheel width 45 mm of a bandsaw
Piston pin lock reference 3904803008 for garden tools 4 in 1 and brush cutters Scheppach and Woodster 51,7 cm3
TCT circular saw blade diameter 550 mm with chip limiter specially for log saw
Start your single-phase or three-phase wood machine at the same time as your vacuum cleaner with this automatic release!
Arbor shank 8 mm for finger joint and groove with slot cutters CMT 924.080.10
This plastic back cover fits various Scheppach and lawnmowers
Air hose for various Scheppach compressors HC53DC, HC55DC, etc...
Switch for radial miter saw Scheppach KGZ251, Kity MS254, Woodster SL10LU² and others
Air filter for compressor Parkside PKO 500 A1, PKO 270 A3 and PKO 270 A5, Scheppach HC24(e) et HC50(e)
Set of accessories for the Kity 550 and 750 or Scheppach CS55, PL55 and PL75 plunge saws
Profile knives and limiters 50x5,5 mm, profil n°215
Profile knives and limiters 40x4 mm, profil n°75
TCT circular saw blade 216 mm 48T negativ for sliding miter saw and electrical Hand Machines
The dust collector Holzmann ABS3880 has a capacity of 2 times 200 liters of chip storage, so more than its competitors, because its height is greater! It has a motor of 2200W, a suction power of 3880 m³ / h!
TCT circular saw blade diameter 305 mm Z64 negativ for cutting along and across all soft and hard woods.
Wheel shell diameter 200 mm for rear wheel of Scheppach mower
Iron spring for thicknesser planer Scheppach HMS1070 series starting with 0109 (part 58 on the exploded view)
Rubber bandage for flywheel bandsaw diameter 355 mm
Planing and jointing spiral cutter head diameter 62 mm height 60 mm for spindle moulder
TCT circular saw blade 216 mm 60T negativ for sliding miter saw and electrical Hand Machines
Laser Radial saw Scheppach, Dexter, Woodster and Parkside
Abrasive belt 2515x150 mm grit 120 in a professional quality antistatic for edge sanding machines as Holzmann KOS2510N, Bernardo HV80 OZSI, Scheppach Slik 7.0B, Scheppach KSM2500
Electronic dimmer reference 3906814006 for Parkside PTBMOD710A1 column drill
Screw for radial miter saw Scheppach, Parkside, Kity and Dexter
Launcher reference 5911249035 for Scheppach and Woodster lawn mowers
Complete rod marks 73 + 74 + 78 + 81 + 84 + 91 + 117 for scroll saw Scheppach SD1600V
Profile knives and limiters 40x4 mm, profil n°99
Air filter for Parkside compressor PKO 270 A4 and PKO 500 A2
Bandsaw blade length 2400 mm for different machines as Lurem SAR350
Multidirectional trolley for moving the length and width of long pieces, supports up to 60 kg!
Helicoidal mortising drill bit with chipbreaker 6 mm shank 6 mm in right rotation for mortiser
Belt 737Li reference 59112659009 or 3911203011 for Scheppach LMP460SP, LMP530BSV and Woodster TT460BS lawn mowers
2500 pieces Galvanised Ring Nails in 50 mm
4-jaw self-centering chuck diameter 95 mm M33
Blade holder bottom 88002173 for scroll saw
Side deflector reference 5911241017 for Scheppach lawn mowers (replaces ref 3911207011)
Abrasive belt 560x100 mm grit 40 for portable belt sander
Blade reference 7910700702 for 4 in 1 garden tools and brushcutters Scheppach, Woodster as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)
80 cm extension part number 7910700710 for Scheppach and Woodster 4 in 1 garden tools and brush cutters as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)
Light plate for former Kity band saws
Safety guide with a length of 700 mm in aluminum adapted to the small spindle moulders model
Bandsaw blade length 2360 mm for different machines as Kity 673, Scheppach Basato 3H, Scheppach Basato 3.0V and Basa 3, Record Power
Battery 2.0Ah for garden tools on battery Scheppach MFH380-20 Li Dual, ABL-20Li and MFB4-40LI
Working shaft reference 3904801045 for garden tools 4 in 1 and brush cutters Scheppach and Woodster
In case of breakage, see the complete item, part number 3904801032 or part number 3904805007 depending on your machine
This rear bearing or roller intended for the Kity SAR200 band saw or Scheppach HBS20 corresponds to marks 35 and 36 of the exploded view
Pressure regulator for Scheppach HC50V and HC24V compressors
5 meters of paper abrasive roll width 115 mm grit 180 for hand sanding and vibrant sander in a high quality professional !
Poly V belt 3PJ610 for planer Scheppach HMS860 and HMS1080
The PU flexible Ducting hose diameter 100 mm is in professional quality, very flexible, resistant and antistatic ! 2.5 meters
With this adapter, you will mount your Karcher accessories on your Scheppach pressure washer
Abrasive belt 13x455 mm grit 80 for power belt file as Silverstorm, Dexter Power, Black and Decker KA902EK...
Plate washer for Scheppach and Woodster mowers
The Dust collector Holzmann ABS3000SE is a powerful mobile machine with a powerful 1500W motor guaranteeing an incredible suction capacity of 3000 m³ / h!
TCT circular saw blade diameter 200 mm Z64
Kit travel Holzmann UFE410FLEX, form expandable frame, for woodworking machines of up to 250 kg approximately.
Bandsaw blade length 2560 mm width 20 mm
Profile cutterhead with TC reversible knives diameter 120 mm height 50 mm for spindle moulder shaft 50 mm
Carbide insert 50x12x1.5 mm, box of 10 pieces
Scheppach HS510 log saw with a blade of 500 mm can cut firewood up to 17 cm!
Belt Poly V for circular saw of wood combined Lurem C310
Outer flange Ø45/Ø16x5 mm for Scheppach, Woodster, Parkside, Dexter and Manupro radial miter saws
Plastic lower bag for dust collector Ø700 mm - Set of 10 pieces
The tool trolley Scheppach TW1000 comes equipped with A 263 tools !
Belt reference 3911205011 for Scheppach and Woodster lawn mowers (series n° 0177)
Set of pulleys for mini wood combination
Galvanised Smooth Shank Nails length 25 mm 18G 5000pk
Belt Poly V for wood combined Lurem C265
Diamond wheel for saw blade Sharpener - Bore 13 mm
HSS 18% Planer knive 310x25x2.5 mm for planer and thicknesser
Carpenter's pencils of oval section with soft lead for all traces on wood and other construction materials.
Cylinder reference 3904803011 for garden tools 4 in 1 and brush cutters Scheppach et Woodster 51,7 cm3
Abrasive belt grit 240 in a professional quality for drum sander width 400 mm
Magnet welding powerful to maintain the workpieces in place at 45°, 90° and 135°.
Profile knives and limiters 40x4 mm, profil n°177
Fixing joint for various Scheppach lawn mowers
TCT circular saw blade 210 mm 24T for sliding miter saw and electrical Hand Machines
Metal band saw Holzmann BS115 ideal for cutting iron, steel, aluminum, copper and PVC.
