The Holzmann WEWA1216SET metal workbench + table set consists of a workshop workbench on wheels, with 6 drawers, a cabinet and a wooden top, and a table with a wooden top.

Capacitor 25UF - 450V special start-up machine

Foam filter reference 7907709715 for Scheppach water and dust vacuum cleaner

Foam filter reference 7907702703 for Scheppach water and dust vacuum cleaner

Blade clamp in 260 mm for planer thicknesser Leman RAD260, Lurem RD26F, Holzmann HOB260MINI - Sold individually without screws

Tailstock MK2 for wood lathe Holzmann VD1100Eco

Clamping lever marks 43-45 and 47 for Scheppach SC38 scarifier

Angle guide for belt sander and bench disc Scheppach, Woodstar and Manupro

Belt protection piece item 26 for Scheppach, Woodstar and Manupro belt and bench disc sander

Loncin G200F complete air filter for various vibrating plates, scarifiers, tillers and mini dumpers Scheppach and Woodster

The Dust collector Holzmann ABS3000SE is a powerful mobile machine with a powerful 1500W motor guaranteeing an incredible suction capacity of 3000 m³ / h!

MK3 rotating tailstock for metal lathes and wood lathes.

Stop rail for construction site circular saw Kity, Scheppach and Woodster

Hook and Loop abrasive disc diameter 250 mm grit 240 for sander polishers, orbital sander

Cable chain for tile cutter

Guide marker 31 reference 3902102029 for router on table Scheppach, Woodstar and other brands

Belt for Jet wood lathe

E28 sprocket for lawn tractor

Fuel filter reference 5911235099 for Scheppach MR196-61 lawn tractor reference S7 and Scheppach MR224-61 reference S6

Pad for planer jointer Scheppach HMS1070 series 0115

Plate for router Scheppach HF50, Woodster BS52 and BS53 or Kity PB5200

Cylinder head gasket for Scheppach compressor

Bandsaw blade bimetal 2450 mm with variable pitch 6/10TPI suitable for different metal bandsaw as Holzmann BS275TOP et BS275GP, Bernardo HBS275

Gear segment for Scheppach HS100E table saw

Emergency stop for Holzmann HOB260ABS and Bernardo PT260 or Bernardo PT305D planers

Straight table extension for construction saw

Puller reference 3910106011 for chainsaw

Powerful and precise JET HVBS-56M metal band saw ideal for small workshops and construction sites. Its 1/2 HP single-phase motor offers great versatility and power when cutting in the horizontal position.

Hose connector for 4 in 1 garden tool and brush cutter Scheppach and Woodster

Engine cover for Scheppach compressor HC54

Transmission box reference 5911238009 for Scheppach and Woodster lawn mowers

Knives for Scheppach MB850 and MTP850 two-wheel tractor

Input table for thicknesser Scheppach HMS1070 série 0115 and Zipper ZI-HB254

Motor for tile cutter

Ignition coil RY56BS or YD43BS for various Scheppach and Woodster chainsaws.

JET 719A 230V mortiser, the reference mortiser for all classic carpentry work!

The JET JBOS-5 oscillating spindle sander is designed for precise sanding of edges, curves, rounded profiles and internal contours in wood and wood-based materials.

Its combined 1400 rpm rotation and 30 oscillations per minute ensures even use of the sanding sleeve and efficient sanding of straight or shaped workpieces.

• 0.37 kW (0.5 HP) 230 V motor
• Spindle speed: 1400 rpm
• 30 oscillations per minute with a 25 mm stroke
• 370 x 370 mm worktable, tiltable from 0 to 45°
• 5 spindle diameters: 6, 12, 16, 38 and 50 mm
• Ø 100 mm dust extraction port

The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.

M6x16 screw for clamping the saw blade on the table

Flexible with torch for Scheppach PLC40 plasma cutter

Spring 32 mm for log saw

Carrying handle for ash vacuum cleaner

Motor 230V for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO

Exhaust for garden tool and brush cutter Scheppach and Woodster 32.6 cm3

Bandsaw blade length 3345 mm for different machines as (Bernardo HBS400N)

Automatic table feed for KF 25 D Vario/L Vario/Pro

Height adjustment rod for table saw marks 25-28 and 20

50 sanding sheets for hand sanding, very good finish, pro quality klingspor

Motor 230V for Holzmann TS250 table saw

Air filter cover for lawn mower Scheppach MS197-51-3W

Mark 67 drive wheel for Scheppach and Woodster chainsaw

Reading magnifier for Scheppach PLM1800 planer

Shaft door spindle MK3 - B18

Axis Piece 69 for radial saw Holzprofi SRO305 and Leman SOR310

Switch for thicknesser Kity Scheppach Woodstar 204 mm

Chip ejection hood for various Scheppach and Woodster planer thicknessers in 204 mm width

Log saw key 8x7x30 mm reference 5905113012 for Scheppach HS510 and Woodster SW505  log saws

Needle bearing reference 1910701007 for garden tools 4 in 1 and brush cutters Scheppach and Woodster 32.6 cm3

Parallel guide for Scheppach and Woodster table saws 

Tensioner for calibrating sander 400 mm Leman, Holzmann, Jean l'ébéniste

Grass catcher basket for Scheppach and Woodster lawn mowers

Reference clutch 3910102016 for Scheppach and Woodster chainsaws

Chip ejection housing for planer and thicknesser Scheppach HMS1070 with serial number starting with 0115

Holzmann EKR15M electric wall-mounted hose reel with 15 m cable length.

Side deflector reference 5911204049  for Scheppach and Woodster lawn mowers

Pusher reference 3905201035 for horizontal log splitter 4 to 7 tons Scheppach, Woodster and Mac Allister, marker 51

Electronic card for electric tile cutter Scheppach FS4700 and FS3600

Guide for Scheppach HMS1080 and Scheppach RD255ATG

Safety key reference 5911210016  for cordless Scheppach and Woodster lawn mowers

Starter reference 5910202008 for Scheppach CSE2400 chainsaw

Right stop for radial miter saw Parkside PZKS2000A1

Angle guide for table saw Scheppach HS110 (before 10/2019)

One liter can of wood tint, white color, special parquet, before vitrification or varnishing.

Flexible hose 1.5m dia 40 mm for the blade of Scheppach TS310

Lower Handle cover for Scheppach HM254 manufactured until October 2020

Handle cover for Scheppach HM254 manufactured until October 2020

Screw reference 1910103048 n°91 for Scheppach CSP41

Holzmann FAN4000 suction turbine perfect for wall mounting!

Locking bracket for Kity and Scheppach circular and combined saws

The Sliding table saw Jean l'ébéniste SAF1300 is a precision saw equipped with a carriage flush with the blade 1300 mm for a cutting height of 80 mm.

Blade locking handle for Scheppach and Kity KS305SL2 radial miter saws

Aluminium working shaft set reference 5910705001 marked 2.1 - 2.2 / 3 Φ26x760mm for Scheppach and Woodster brush cutters 

On-off switch for saw Scheppach TS251 and Scheppach HBS300

This manual folding machine with a robust frame and frame allows you to bend profiles or make boxes with great precision over a working length of 610 mm.

Holzprofi AC150 double filtration suction unit allowing two levels of filtration!

Manual notcher Holzmann RAM43 particularly suitable for gas pipes, stainless steel, non-ferrous.

The drilling and milling machine KF 25 Pro features a high speed range up to 3000 rpm, a powerful drive motor (900 W) and a MT 3 spindle taper making this model ideal for user with high expectations. For reducing the non-productive time, this model is equipped with a 3-axis digital readout and a stepless adjustable table feed.

Connector for Scheppach, Woodster and Parkside compressors corresponding to mark 55 on the exploded view

Chain for mini combined Kity K6-154, Scheppach Combi 6 and Woodstar C06

Bernardo BMO 120 drilling vice

Handle D13 for Scheppach and Woodster lawn mowers

Carbon brushes for sharpener

The model WBS 640 Pro is a professional cylinder sanding machine with stepless adjustable feed rate. Thanks to the 2 sanding rollers, rough and fine sanding can be carried out in one pass by using different sanding belt grain sizes. The heavy machine stand ensures high stability and thus precise grinding results.

Deluxe copier for large wood lathe between centers 1100 to 1200 mm