Oil tank cap for various Scheppach chainsaws

Rotating brush reference 5907702703 for Scheppach high-pressure washer

Knife protector for planer and thicknesser 254 mm

Metabo LI-POWER 18 V / 5.2 AH battery with patented "Air cooled" technology.

The sanding machine Holzmann BT75 is ideal for fine sanding and fretwork work.

Blade protector for table saws Scheppach HS100S, Woodster ST10S and Dexter TS100S 

Drill bit Ø 35 mm with multiple knives for making corks.

Armature for radial miter saw Kity MST254, Woodster SX10T and Scheppach HM100T

Chain wheel for mini wood combination

Part 5910109008 Air Filter for Scheppach CSH56, CSP5300, Woodster CSP53 and Parkside PHKS 53A1 Benchmark 61 Chainsaws

Blade guide system for Kity 673, Scheppach Basato 3H, Basato vario and Basa 3.0V band saws

16mm shank for the Robbin tool holder suitable for mini wood lathes!

5000 Staples 1.2 mm type 90 in 22 mm

Shield adapter reference 3904801022 for brush cutters Scheppach et Woodster 32.6 cm3, pieces  20+19+9 from the exploded view

Rear wheel ref. 3911202019 for Scheppach and Woodstar lawn mowers according to the following list: COMPATIBLE MACHINES LIST

Sawhorse Holzmann AB1015, easy to transport and stable on all surfaces!

Extension for Log saw Holzmann BBS350

Abrasive Bobbin sleeve diameter 73 mm for sanding cylinder height 100 in Grit 120

Tool Support 180 mm for mini wood lathe Holzmann D300F

Capacitor 60UF - 450V special start-up machine

TCT circular saw blade 200 mm with trapezoidal negative teeth for non ferrious metal and aluminium

Suction turbine Holzmann ABS2200FLEX ideal for maneuvering, perfect for connecting to woodworking machines!

Pair of brushes for radial miter saw Kity MS216A or Scheppach HM80MP

Clutch or acceleration cable reference 3911201008 corresponding to mark A10 for Woodster and Scheppach mowers

Carbon brushes  reference 5904401020 for chipper shredder Scheppach GSH3400

Motor pulley for Woodster ST10 table saw, part n ° 134 ref 3901301041 of the exploded view

Seal reference n°8 in your exploded view for compressors Scheppach HC24 and HC50, and Woodster CB24 and CB50

Filter for wet and dry vacuum cleaner Scheppach ASP12-ES et ASP15-ES

Screw of reference 157 to hold the pulley on the Bernardo PT260 and Holzmann HOB260ABS jointer

Chainsaw guide bar reference 3904801037 for Scheppach and Woodster 4 in 1 garden tools and brushcutters as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)

Welding Goggles

Powerful and stable Sliding mitre saw Holzmann KAP305ECO equipped with a 1800W motor, laser, and other options to work efficiently with precision!

Electrical holder hoist Holzmann LK4ESZ for hoists Holzmann ESZ250D, ESZ500D and ESZ1000D.

Very compact, the small KF 16 L Vario drilling-milling machine is fitted as standard with a digital display of rotation speed and spindle depth. This model is appreciated by precision mechanics and demanding model makers

Mortising dill chisel diameter 14 mm DIY quality adaptable on mortiser square chisel shank 15.9 mm or 19 mm

The Holzmann NTS200Flex water grinder effortlessly sharpens all your woodworking tools and cutting tools without heating them as the stone is plunged into a cold water bath!

Capacitor 14UF - 450V special start-up machine

Handle of the radial miter saw Kity MS254, Scheppach KGZ251 and Woodster SL10LU² (item 136)

Switch to spindle moulder Triton TRA001, MOF001 and JOF001

Bare shaft for thicknesser Scheppach HMS1070 - Series n ° 0109

Handle No. 167 or 175 for locking the connection guide of Holzmann HOB260ABS and Bernardo PT260/PT305D planers

Fuel tank reference 3904802006 for multi-tool and brush cutter Scheppach and Woodster 32.6 cm

Hydraulic pump reference 3905306032  for vertical log splitter Kity PV6000, Woodster LV60, Scheppach HL700 and HL600E

Holzmann mobile metal cutting machine MKS355N with TCT saw blade – powerful, precise, mobile

An aluminum union fitting diameter 80 mm is required to connect hoses together

Tool trolley Holzmann WW690L sustainable and robust with lateral reinforcements.

This electronic metal lathe Holzmann ED750FD has impressive capabilities and has an optimal quality-price ratio!

Special stand for milling metal drills

Threaded rod on T-bar

The Bench drill Bernardo BM16 Vario offers  high torque even at low speed due to its variable speed and a capacity of 16 mm in steel.

The Holzmann KOS2510N belt sander allows you to work tall, wide and long workpieces in any workshop.

.

Thread rolling machine sheet metal manual Bernardo HRM610.

.

.

Adjustable grooving cutter with TC reversible blades to create precision slots and grooves for spindle moulder shaft 50 mm

The Carbamex colori Antic Dark paste wax is the patina of the Master Cabinetmakers!

Cornice mouldings ET75122 lenght 2.40 m x width 36.5 mm.

Ovolo router bit radius 5 mm - Shank 8 mm for plunge router

Butting ring diameter 120 mm for spindle moulder 30 mm

Set of 2 TC profile knives form 4 for profile and counter-profile cutter

2 TC panel raising blade Form n° 1 - Version Top

Profile knives and limiters 40x4 mm, profil n°56

Profile knives and limiters 40x4 mm, profil n°41

Starter part number 39112839002 for Scheppach, Woodstar and Parkside lawnmowers according to the following list: LIST OF COMPATIBLE MACHINES

Drive pinion part number 5906822016 for Scheppach and Parkside drills according to the following list: LIST OF COMPATIBLE MACHINES

Carbon holder 3904410011 for Scheppach vegetable shredder

Carbon brushes for Leman LOASP201, LOASP301, LOASP306 wet and dry vacuum cleaner

The HOLZMANN RLE1500_230V cyclone dust collector with remote control, cyclone separator and filter cartridge is the ideal dust colletor system for your woodworking machines.

Riving knife 5901308082 for Scheppach table saw (from 10/2019)

Shim for various log splitters 7 tons Scheppach or Woodster

Planing and jointing spiral cutter head diameter 62 mm height 80 mm for spindle moulder

Crankshaft reference 5911245045 reference B-42 for Scheppach MS225-53(E) lawnmower with manufacturing date from 08/2023

Q8 disc holder shaft - For tongue groove + 5 Leman grooving discs 4728.700.52

Drive roller for Leman Lodra 260 thicknesser planer

Collet ER20 in 8 mm for CMT Chuck serie 796