Belt for Jet jointer planer

JET JWBS 10-M band saw with a capacity of 100 mm and equipped with a large table allowing you to work on already substantial sections.

JET JWBS-20 400V band saw allowing a cutting height of 300 mm.

This small JET JWBS-9X bandsaw will offer amateurs the possibility of cutting panels with dimensions less than or equal to 230mm, over a maximum height of 80mm.

The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.

The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.

The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.

The JET JSG 31A JSG 31A belt and disc sander allows you to carry out heavy sanding and finishing work.

Belt and disc sander JET JSG 96-M equipped with 2 cast iron tables giving it the stability necessary for precision work.

Belt for Jet wood lathe

Bench extension for Jet JWL1221 and JWL1221S wood lathe

Carbon brush for Jet wood lathe

JET DC-1100CK chip vacuum cleaner with filter cartridge with Vortex Cone technology!

JET DC-1100CK chip vacuum cleaner with filter cartridge with Vortex Cone technology!

Big sister of the JTS 315LA-M, with slightly higher capacities, the JET JTS-315SP construction circular saw is distinguished by its use both on site and/or stationary in a workshop.

The 1st stationary machine in the range, its mechanically welded frame and its 800x350 cast iron table give the JET JTS-600X circular table saw stability and robustness.

The 1st stationary machine in the range, its mechanically welded frame and its 800x350 cast iron table give the JET JTS-600X circular table saw stability and robustness.

Clamping wedge for Jet JPT-260 jointer

Clamping wedge for Jet JPT-310 jointer, set of 3

This JET JTS 315LA-M table saw, mainly intended for small construction sites, will allow you to transform your panels on site.

JET JCDC 15-M cyclonic suction system allowing 99% filtration of particles from 1 micron.

JET JCDC 20-M cyclonic suction system allowing 99% filtration of particles from 1 micron. Cyclonic suction system 2610m3/h

JET JCDC 30-T - 400V cyclonic suction system allowing 99% filtration of particles from 1 micron. Cyclonic suction system 3330m3/h.

JET JWDS-1632 Cylinder Wood Sander for precise cylinder sanding on a JET-grade mobile machine!

JET JWDS-1836 Cylinder Wood Sander for precise cylinder sanding on a JET-grade mobile machine!

The JET DDS-225 sander is a robust and powerful machine offering the discerning user and the craftsman all the advantages of a wide belt sander in a minimum of space.

Electrostatic filter for Jet AFS-400 air filtration system

Floor column drill JET JDP 17-M equipped with a precision ground work table, cross laser and other equipment for precise and comfortable work!

Floor column drill JET JDP 17-T equipped with a precision ground work table, cross laser and other equipment for precise and comfortable work!

Inner filter for Jet AFS-400 air filtration system

Sturdy chisel mortiser tilting at 35° JET 719-AS.

JET AFS 1000B-M filtration system

Essential portable JET AFS 500-M filtration system for your workshop.

JET AFS-400 filtration system ideal for small workshops!

Jet brand MK2 feed dog

JET DC 1300-M suction system

The JET JBS12-M band saw is only available single-phase. Its 305 mm wheel and its blade width of 5 to 16 mm allow fretwork at a cutting height of 180 mm. Its cast iron table tilts 45 degrees and its cutting depth is 305 mm.

Sharpening Disc

JET JWBS14Q-M bandsaw with a capacity of 200 mm and equipped with a wide table allowing you to work beautiful sections of wood. Very reliable in construction and with a quality finish, the Jet JWBS 14Q-M stands out from its competitors!

The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.

JET JWDS 1020-M drum sander features an open-sided construction allowing for sanding widths of up to 508mm in two passes!

JET JWDS 2244-M calibrating sander, new version and new design.

JET's newly redesigned 2244 Oscillating Drum Sander has an exclusive oscillating feature that helps create the best sanding finish with the least dust. In oscillating mode, the sanding drum head oscillates from left to right, which reduces heat buildup on the sanding belt, reducing loading and burning.

JET JWS 34KX-M 4-speed spindle moulder - 230V

JET JWS 34KX-T 4-speed spindle moulder - 400V

Mechanical planing height indicator

Powerful and precise JET HVBS-56M metal band saw ideal for small workshops and construction sites. Its 1/2 HP single-phase motor offers great versatility and power when cutting in the horizontal or vertical position.

High quality category G microfiltering bag = 9.5% filtering efficiency for microscopic dust from 0.2 to 2 microns

The JET JBOS-5-M 230V oscillating sander solves all the most complex sanding tasks!

Pinion for JWP12 jointer and planer

Pinion for Jet JPT310 thicknesser planer

Planer thicknesser JET JPT 10B equipped with a 254 mm wide planing table and a powerful 1500W motor.

The JET JPT-310 planer-thicknesser is a combined 230 volt planer with cast iron tables with a useful planing width of 310 mm.

The JET JPT-310 planer-thicknesser is a combined 400 volt planer with cast iron tables with a useful planing width of 310 mm.

Top-of-the-range JET JPT 310HH planer jointer with very high precision thanks to its reversible quadruple inserts, ultra-fast change from jointer to planer.

Top-of-the-range JET JPT 310HH planer jointer with very high precision thanks to its reversible quadruple inserts, ultra-fast change from jointer to planer.

The JET JPT-410 planer-thicknesser is a 400 volt machine with cast iron tables with a useful planing width of 410 mm with simultaneous opening.

The JET JPT-410HH planer-thicknesser in 400 volts is designed with cast iron tables with simultaneous opening with a useful planing width of 410 mm. The cut is performed by 72 reversible carbide inserts.

Powerful JET JPT-F260-M planer thicknesser equipped with a 3 iron shaft.

Powerful Planer thicknesser JET JPT-F260-T - 400V equipped with a 3 iron shaft.

Planer jointer JET RDJ-410HH of European construction, it will offer you complete satisfaction. Equipped with a large 1500x150mm planing guide, tilting at 45°, this will allow you to find constant support throughout planing.

Planer jointer JET RDJ-410HH of European construction, it will offer you complete satisfaction. Equipped with a large 1500x150mm planing guide, tilting at 45°, this will allow you to find constant support throughout planing.

JET RDJ-310 planer jointer part of the latest generation JET planer jointer. Made in Europe, it offers remarkable possibilities and quality of work.

JET RDJ-310HH planer jointer with helical shaft as part of the latest generation JET planer jointer. Made in Europe, it offers remarkable possibilities and quality of work.

JET RDJ-310HH planer jointer with helical shaft as part of the latest generation JET planer jointer. Made in Europe, it offers remarkable possibilities and quality of work.

The JET RDJ-410 planer jointer is one of the newest models in the popular JET range of planer jointers, but European made: a combination of the highest quality to offer machines that will bring the greatest satisfaction to you all. respects.

The JET RDJ-410 planer jointer is one of the newest models in the popular JET range of planer jointers, but European made: a combination of the highest quality to offer machines that will bring the greatest satisfaction to you all. respects.

JET JWP 12L planer featuring a powerful 1700W motor with overload protection.

This JET JTSS-1600 circular panel saw is equipped with a powerful motor that will allow wood professionals continuous and quality work in the cutting of solid, melamine or plywood panels.

This JET JTSS-1600 circular panel saw is equipped with a powerful motor that will allow wood professionals continuous and quality work in the cutting of solid, melamine or plywood panels.

Equipped with a 2CV engine, this JET JSMS 10L-M radial miter saw will allow you to cut up to 305 mm wide by a height of 90 mm.

JET JRT-2 router table for mounting and fixing a router upside down, and thus working as on a small router. Lightweight and small footprint.

Rubber Banding of Flywheels for Bandsaw

The JWSS 354-V is a high-end scroll saw, for scrolling parts requiring large capacities and excellent ergonomics, and with a variable speed system.

The JET JWSS-22B scroll saw is a large-scale, professional-type machine with its XXL 600 x 325 mm table and its very deep 565 mm gooseneck. Top model of high finish.

Big sister of the JTS 600X, its mechanically welded frame and its 800x350 cast iron table give the JET JTS-600XL table saw stability and robustness.

Big sister of the JTS 600X, its mechanically welded frame and its 800x350 cast iron table give the JET JTS-600XL table saw stability and robustness.

JET 719A 230V mortiser, the reference mortiser for all classic carpentry work!

JET JBM-5 bench chisel mortiser compact, portable, easy to use in the workshop or on the construction site.

Straight table extension for construction saw

The ideal compromise between a router and a router, the JRT-1 router table allows you to carry out your milling work with precision and ease. Perfect for small workshops and job sites.

Tool Support 250 mm shank 16 mm for mini wood lathe Jet JWL1221VS

The JET DDS-237 sander is a robust and powerful machine offering the discerning user and the craftsman all the advantages of a wide belt sander in a minimum of space.

JET DC-1100A, a state-of-the-art wood vacuum system from JET!

With its 500 mm between centers, this lathe will allow you many achievements. Coupled with its bench extension, pieces of around 1m will no longer be a problem for you.

The Jet variator bench wood lathe presents itself as a renewal in the range of bench lathes with its heavy and wide gray cast iron frame, for high stability and minimum vibrations during turning.

Equipped with a 2-speed motor, this JET JWL 1640EVS lathe with variation in each range, will allow you to carry out all your projects.

Equipped with a 2-speed motor, this JET JWL 1840EVS-M lathe has speed variation in each range and will allow you to carry out all your projects.

1st model in the range on a stand, this JWL 1440VS-M lathe will allow you to carry out all your projects.

Wood lathe motor pulley for Jet JWL1220VS and JWL1221VS wood lathe