75 mm grit 80 abrasive roll for Jet drum sanders – Length 12.50 m

This 75 mm wide grit 80 abrasive roll is specially designed for Jet drum sanders using narrow abrasive strips wrapped around sanding drums. Thanks to its specific 75 mm width, this abrasive ensures perfect compatibility with Jet machine fixing systems and excellent holding during operation.

With a total length of 12.50 meters, this roll allows you to produce up to 4 or 5 abrasive strips depending on your machine dimensions and the required length for each sanding drum.

Grit 80: ideal for intermediate sanding and wood preparation

Grit 80 is especially suitable for intermediate sanding, light calibration work and wood surface preparation before finishing operations. It provides an excellent balance between material removal and surface finish quality.

This grit is particularly used for:

• solid wood;
• tabletops;
• panels;
• MDF;
• joinery parts;
• and cabinetmaking components.

Why use 75 mm abrasive strips on Jet drum sanders?

Jet drum sanders specifically require abrasive strips with a 75 mm width. Unlike other machines using 77 mm strips, Jet drum fixing systems and drum dimensions are specifically designed for this width.

Using abrasive strips that are too wide may cause:

• insertion difficulties;
• poor drum alignment;
• overlapping during winding;
• vibrations;
• incorrect strip tension;
• or premature abrasive wear.

Using the correct 75 mm width guarantees optimal machine operation and excellent sanding quality.

Tapered end cutting required before use

Before installation on the machine, it will be necessary to make a tapered cut at each end of the abrasive strip.

This cut consists of shaping the strip end into a tapered or pointed form in order to allow proper insertion into the sanding drum fixing system.

This specific shape is essential to:

• facilitate insertion into the drum clamps;
• avoid excessive thickness during winding;
• improve strip alignment;
• reduce vibrations;
• and ensure even tension during operation.

The cut can easily be made using:

• a utility knife;
• a metal ruler;
• or heavy-duty scissors suitable for cloth-backed abrasives.

Compatible with Jet drum sanders

This grit 80 abrasive roll for Jet drum sanders is compatible with the following machines:

• Jet JWDS-1020;
• Jet JWDS-1632;
• Jet JWDS-1836;
• Jet JWDS-2244;
• Jet JWDS-2244OSC;
• and many other drum sanders using 75 mm abrasive strips.

Heavy-duty cloth backing

The cloth backing provides significantly greater mechanical resistance than traditional paper abrasives. It offers:

• excellent tension resistance;
• better heat resistance;
• greater flexibility during winding;
• longer lifespan;
• and a significant reduction in tearing risks.

This type of abrasive is perfectly suited to the demanding conditions generated by drum sanding machines.

An abrasive specially designed for Jet drum sanders

Thanks to its specific 75 mm width, 12.50 meter length, versatile grit 80 and heavy-duty cloth backing, this abrasive roll for Jet drum sanders is an ideal solution for users looking for efficiency, consistent sanding quality and long service life.