Arbor for Slot cutter - Shank 6 mm
Arbor shank 6 mm for finger joint and groove with slot cutters
Router cutters are dedicated to ripper work which is not an easy operation in the field of carpentry!
Our router bits have an anti-kickback profile in compliance with quality standards. They are covered with teflon allowing the chips not to stick. The beautiful thickness of the 2 profiled carbide brazed pads on the body offers a longer life.
For 6 to 12.7 mm shank routers, we offer a wide range of router bits for all types of work: grooving, tongue or groove, routing, molding, chamfering, quarter rounds, holidays, dovetails, curls and decorative moldings, ...
They are good quality but also economical for the handyman wanting to get a nice range at a reduced price. At the unit for the most demanding, our professional carbide micrograin router bits will bring a more precise and clean job.
To be used in compliance with the safety standards in force.
Arbor shank 6 mm for finger joint and groove with slot cutters
Cove router bit radius 12.7 mm - Shank 6 mm for plunge router
Cove router bit radius 6.35 mm - Shank 6 mm for plunge router
Cove router bit radius 8 mm - Shank 6 mm for plunge router
Ovolo router bit radius 6 mm - Shank 6 mm for plunge router
Set of 12 carbide router bits of different profiles shank 6 mm for plunge router quality DIY
Arbor shank 8 mm for finger joint and groove with slot cutters
Slot cutter thickness 2 mm for sidelong grooves
Slot cutter thickness 3 mm for sidelong grooves
Slot cutter thickness 3,5 mm for sidelong grooves
Slot cutter thickness 4 mm for sidelong grooves
Slot cutter thickness 5 mm for sidelong grooves
Slot cutter thickness 6 mm for sidelong grooves
45° Chamfer router bit - shank 8 mm for plunge router
25° Chamfer router bit with ball bearing - shank 8 mm
45° Chamfer router bit with ball bearing - shank 8 mm
Rabbeting router bit Ø 32 mm shank 8 mm for plunge router
Decorative ogee router bit Ø 19 - shank 8 mm for plunge router
Roman ogee router bit Ø 28.7 - shank 8 mm for plunge router
Roman ogee router bit Ø 33.4 - shank 8 mm for plunge router
Roman ogee router bit Ø 38.1 - shank 8 mm for plunge router
Straight router bit Ø 10 mm shank 8 mm for plunge router
Straight router bit Ø 10 mm shank 8 mm for plunge router
Straight router bit Ø 12 mm shank 8 mm for plunge router
Straight router bit Ø 12 mm shank 8 mm for plunge router
Straight router bit Ø 15 mm shank 8 mm for plunge router
Straight router bit Ø 6 mm shank 8 mm for plunge router
Straight router bit Ø 20 mm shank 8 mm for plunge router
Straight router bit Ø 25 mm shank 8 mm for plunge router
Straight router bit Ø 5 mm shank 8 mm for plunge router
Straight router bit Ø 6 mm shank 8 mm for plunge router
Straight router bit Ø 6 mm shank 8 mm for plunge router
Straight router bit Ø 8 mm shank 8 mm for plunge router
Straight router bit Ø 8 mm shank 8 mm for plunge router
Cove router bit radius 12.7 mm - Shank 8 mm for plunge router
Cove router bit radius 8 mm - Shank 8 mm for plunge router
Cove router bit radius 9.5 mm - Shank 8 mm for plunge router
Lot of 2 carbide router bits for assembly
Round nose router bit radius 4.75 mm Shank 8 mm for plunge router
Round nose router bit radius 6.3 mm Shank 8 mm for plunge router
Roundover router bit radius 12.7 mm - Shank 8 mm for plunge router
Roundover router bit radius 6.35 mm - Shank 8 mm for plunge router
Roundover router bit radius 9.5 mm - Shank 8 mm for plunge router
Dovetail router bit diameter 12,7 mm shank 8 mm for plunge router
90°-V-Grooving router bit - Shank 8 mm for plunge router
Flush trim router bit 12.7 mm length 25 mm - shank 8 mm for plunge router
Finger joint router bits Shank 8 mm for plunge router
45° lock miter router bit shank 8 mm for plunge router
Set of 12 carbide router bits of different profiles shank 8 mm for plunge router quality DIY
Arbor shank 12 mm for finger joint and groove with slot cutters
Lot of 2 carbide router bits for assembly for plunge router shank 12 mm
Raised panel router bit - shank 12 mm for plunge router
Roundover router bit radius 19 mm - Shank 12 mm for plunge router
Straight router bit Ø 10 mm shank 12 mm for plunge router
Straight router bit Ø 12 mm shank 12 mm for plunge router
Straight router bit Ø 12 mm shank 12 mm for plunge router
Straight router bit Ø 16 mm shank 12 mm for plunge router
Straight router bit Ø 20 mm shank 12 mm for plunge router
Straight router bit Ø 20 mm shank 12 mm for plunge router
Straight router bit Ø 22 mm shank 12 mm for plunge router
Flush trim router bit 12.7 mm - shank 12 mm for plunge router
This practical guide by Bruno Meyer will help you choose the best bits and accessories for your router.
To install bits in tail of 6 mm on dfonceuses in tail of 8 mm.
To install bits in tail of 8 mm on dfonceuses in 12 mm tail.
Mandrel which will allow you to easily adapt your router bits on your router shaft Ø 30 and 50 mm with M16 thread.
Pliers of tightening 12 mm for spindle moulder Triton
Flush trim router bit 12.7 mm with top guide - shank 8 mm for plunge router
Round nose router bit radius 4.75 mm Shank 12 mm for plunge router
Straight router bit Ø 30 mm shank 8 mm for plunge router
Dovetail router bit diameter 14 mm shank 8 mm for plunge router
Slot cutter thickness 2 mm for sidelong grooves
Slot cutter thickness 4 mm for sidelong grooves
Slot cutter thickness 5 mm for sidelong grooves
8 mm shank router bits in a box of 14 profiles!