Holzmann ST2GO Portable Folding Welding Table – A Mobile, Height-Adjustable Workstation

The Holzmann ST2GO welding table is a practical workshop accessory designed to facilitate welding, assembly and preparation of metal components.

Thanks to its folding design, this welding table can be transported between workstations or taken to different job sites.

It provides a convenient solution for welders, metalworkers, maintenance professionals and DIY enthusiasts looking for a portable welding workbench without the space requirements of a permanent welding table.

Its 1068 x 532 mm galvanised steel tabletop offers a practical working surface for various metalworking operations.

With a maximum load capacity of 454 kg, it can support relatively heavy workpieces, provided the manufacturer's operating conditions and stability requirements are respected.

Folding Welding Table for Easy Transportation and Storage

One of the main advantages of the Holzmann ST2GO is its folding construction.

Unlike a permanently installed welding bench, this model can be folded after use, making it easier to transport and reducing the space required for storage.

This feature is particularly useful for:

• Tradespeople working at different job sites.

• Workshops with limited floor space.

• Occasional welding and assembly operations.

• Repair and maintenance work.

• Users looking for a portable welding workstation.

With a net weight of 17.5 kg, this table can be moved and transported according to the user's requirements.

Its design makes it possible to create a temporary welding workstation without permanently dedicating workshop space to a fixed welding table.

Height Adjustable from 705 to 930 mm in 7 Positions

The Holzmann ST2GO height-adjustable welding table features 7 height adjustment positions, allowing the working height to be set between 705 and 930 mm.

This adjustment system provides greater flexibility depending on the operator's height and the type of work being performed.

It can help to:

• Adapt the tabletop height to the working position.

• Improve comfort during welding operations.

• Facilitate the preparation and assembly of metal components.

• Adjust the workstation for different applications.

• Reduce the limitations associated with a fixed-height workbench.

The adjustable height is particularly useful for users performing several different tasks throughout the working day.

The selected height must be correctly adjusted and securely locked before starting work.

1068 x 532 mm Galvanised Steel Tabletop for Metalworking

The Holzmann ST2GO is equipped with a 2 mm thick galvanised steel tabletop.

Its dimensions of 1068 x 532 mm provide a practical working area for positioning metal components, preparing assemblies and carrying out different welding operations.

The galvanised surface provides a degree of corrosion protection under suitable operating conditions.

This table can be used for:

• Preparing components before welding.

• Assembling metal parts.

• Positioning small metal structures.

• Repair operations.

• Maintenance work.

• Occasional metal fabrication projects.

Important: The galvanised coating does not make the tabletop immune to welding spatter, high temperatures or mechanical damage.

Appropriate precautions should be taken to protect the surface whenever the work requires it.

Maximum Load Capacity of 454 kg

Despite its folding construction, the Holzmann ST2GO welding table offers a maximum load capacity of 454 kg.

This makes it suitable for working with relatively heavy metal components, provided the weight is appropriately distributed.

It is particularly useful for assembly, preparation and maintenance operations involving mechanical parts and metal structures.

For safe operation, it is important to:

• Respect the maximum load capacity of 454 kg.

• Distribute the load evenly across the tabletop.

• Avoid concentrating heavy loads along one edge.

• Check the stability of the table.

• Use the table on a flat and sufficiently strong floor.

• Never move the table while supporting a heavy load.

The stated load capacity applies under the operating conditions specified by the manufacturer and does not eliminate the need to check the stability of the complete setup.

Integrated Welding Earth Connection Point

The Holzmann ST2GO welding table features an integrated welding earth connection point on the working surface.

This feature facilitates connection of the welding return circuit when the working configuration allows it.

It is a practical addition for users who want to organise their welding workstation and have a dedicated connection point.

The connection must be made according to the welding equipment manufacturer's recommendations.

It is also important to ensure good electrical contact and check that the connections are not damaged.

The welding return connection does not replace protective earthing or the electrical safety devices required for welding equipment.

A Versatile Welding Table for Workshops and Job Sites

The Holzmann ST2GO portable welding table is particularly suitable for users looking for a metal working surface that is practical, adjustable and easy to transport.

It can be used for various applications:

• Arc welding with suitable equipment.

• MIG/MAG welding for metal assembly operations.

• TIG welding under appropriate working conditions.

• Preparing and positioning metal components.

• Small metal fabrication projects.

• Repair and maintenance work.

• General metalworking and fabrication tasks.

Its folding design makes it suitable for both permanent workshops and occasional work on job sites.

Holzmann ST2GO Technical Specifications

Operating and Safety Recommendations

To use the Holzmann ST2GO welding table correctly, several safety precautions should be observed:

• Install the table on a flat, stable and sufficiently strong floor.

• Check that the folding structure is securely locked before use.

• Adjust the working height before positioning the workpieces.

• Respect the maximum load capacity of 454 kg.

• Distribute loads evenly.

• Use suitable clamps or holding devices to secure workpieces.

• Check the welding return circuit connection.

• Protect sensitive surfaces against welding spatter and excessive heat.

• Wear appropriate personal protective equipment.

• Provide adequate ventilation or welding fume extraction.

• Allow welded components to cool before handling.

• Do not fold or move the table while it is supporting heavy or hot workpieces.

Important safety precaution: Welding galvanised metals can produce hazardous fumes, including zinc oxide fumes. Avoid welding directly onto the galvanised tabletop coating and use appropriate protective measures and fume extraction equipment.

Why Choose the Holzmann ST2GO Portable Welding Table?

The Holzmann ST2GO combines several useful features for welding and metal assembly work:

• Folding design for easier transportation and storage.

• 7 adjustable height positions, from 705 to 930 mm.

• Large 1068 x 532 mm working surface.

• 2 mm thick galvanised steel tabletop.

• Maximum load capacity of 454 kg.

• Integrated welding earth connection point.

• 17.5 kg net weight, suitable for mobile use.

• Designed for welding, assembly and maintenance operations.

Whether you are a professional metalworker, maintenance technician or DIY enthusiast, the Holzmann ST2GO portable height-adjustable welding table offers a practical solution for creating a versatile metalworking workstation.

Discover the Holzmann ST2GO folding welding table at Probois Machinoutils and equip your workshop with a portable, adjustable steel workbench designed for welding and metalworking applications.