The band saw is a table saw that allows the cutting of wood and its derivatives, the cutting of wooden trays and the fretwork.
The amateur is entitled to think that the acquisition of a combined wood will be enough to execute all the carpentry work but he is mistaken ... The circular saw will show him deficiencies both by its reduced cutting height that the inability to make circular cuts. The band saw will quickly become an indispensable woodworking machine because it offers the possibility of fretwork and a large cutting height capacity! The range is very wide, the choice is very easy: for the DIY or the professional, everyone will find his band saw adapted to his work and his workshop! For each of the models, we offer the ribbon blades for fretwork or flow, different widths of blades that will give the user to easily operate curves or straight cuts.
Active filters
This small JET JWBS-9X bandsaw will offer amateurs the possibility of cutting panels with dimensions less than or equal to 230mm, over a maximum height of 80mm.
JET JWBS 10-M band saw with a capacity of 100 mm and equipped with a large table allowing you to work on already substantial sections.
The JET JBS12-M band saw is only available single-phase. Its 305 mm wheel and its blade width of 5 to 16 mm allow fretwork at a cutting height of 180 mm. Its cast iron table tilts 45 degrees and its cutting depth is 305 mm.
JET JWBS14Q-M bandsaw with a capacity of 200 mm and equipped with a wide table allowing you to work beautiful sections of wood. Very reliable in construction and with a quality finish, the Jet JWBS 14Q-M stands out from its competitors!
The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.
The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.
JET JWBS-20 400V band saw allowing a cutting height of 300 mm.
The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.
The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.
