General description of the Bernardo FS310PS planer thicknesser with helical shaft:

• Reduced noise stress (by around 50%) thanks to a standard helical knife planer shaft and up to 20 times longer knife life (thanks to four-times reusable carbide reversible inserts)
• Advantage of reversible carbide inserts: in the event of damage, the individual knives can be replaced or rotated
• Planing tables fold down at the rear of the machine, allowing space-saving installation
• Carbide knives guarantee crack-free planing results and top-quality surfaces for all types of wood
• Integrated chip extraction hood, foldable – diam. of the connection 100 mm
• Digital display on the crank graduated to 1/10 mm for precise table height adjustment
• Anodized aluminum guide, tilting from 90° to 45°
• Powerful motor for optimal planing
• Quick and easy adjustment of the removal per pass
• Numerous protective devices: on/off switch with undervoltage coil, CE-compliant shaft protector, limit switch against accidental starting
• Simultaneous lifting of the two planing tables for an ultra-fast transition from planing to planing

Technical characteristics of the Bernardo FS310PS planer thicknesser with helical shaft:

jointer

• Cutting width: 310mm
• Table length: 1400 mm
• Table height: 825 mm
• Shaft speed: 4500 rpm
• Carbide reversible inserts: 30
• Shaft diameter: 75 mm
• Guide: 1120 x 150mm
• Tilting guide: 90° to 45°
• Maximum removal per pass: 3 mm

Planer

• Table length: 600 mm
• Planer width: 305 mm
• Planing height, min/max: 5 – 240 mm
• Maximum removal per pass: 3 mm
• Feed speed: 5.4 m/min
• Ø suction nozzle: 100 mm
• Continuous power S1 100%: 3.0 kW (4.0 hp)
• Power S6 40%: 4.2 kW (5.7 hp)
• Voltage: 230V
• Dimensions (LxWxH): 1400 x 900 x 980 mm
• Weight (approx.): 205 kg

The Bernardo FS310PS planer thicknesser with helical shaft comes with:

• Helical knife planer arbor with 30 reversible carbide inserts
• Replacement carbide reversible inserts (5 pcs)
• Digital display for planing table
• push button

Important recommendation from Probois for many woodworking machines such as this combination machine :

• Before starting up, always check the inside of the machine: make sure the belts are properly positioned, retighten bolts, grease the tables, etc., as transportation may cause vibrations.

• Always use an extension cord with a 2.5 mm² wire cross-section.

• The extension cord must not exceed 10 meters and must not remain coiled.

• The use of cable reels, triple adapters, or multi-socket adapters is PROHIBITED.

• Provide an electrical supply with special machine start-up fuses of at least 16A.

• Have a compliant electrical installation with neutral and earth connection.

• Always work with a chip extractor for your health and to maintain the machine warranty.

• Always lubricate cast iron tables with table lubricant (slide wax).

• Always operate the machine with safety guards in place.

• Do not work with dull or worn blades; this may damage the mechanism, the planer feed system, or break the belt.

• The machine does not start? The chip ejection hood on the jointer/planer side may be incorrectly positioned — this is a safety feature!