Features of the Holzmann D500VECO wood lathe :

• Spindle nose - Spindle taper M18x2.5mm
• Bed, tailstock, tool holder, and head in gray cast iron
• Smooth operation thanks to the Poly-V belt
• Tool holder, extra long 300 mm, with quick release.
• Large plate Ø145mm, rubber feet to reduce vibrations.
• Tailstock shaft of 10mm.
• The machine is equipped with a class B electrical filter, to avoid any electrical interference with other electronic devices.

Standard equipment :

• Adapter M33x3.5 mm
• 4-tooth drive claw
• 145 mm dia plate
• 300 mm tool holder and support
• 2 gouges
• Assembly tools

Technical characteristics of the Holzmann D500VECO wood lathe :

• Turning ø: 350 mm
• 175 mm center height
• Distance between centers mm: 500
• Spindle speed: 890/12601760/2600 rpm
• Gearbox: 4 stages
• Jaw cone thread: M18
• MK2 jaw cone tailstock
• ø plate mm: 145
• Tool holder (length) mm: 300
• Motor power: 300W
• Weight without extension kg: 16.5

Important recommendation from Probois for many woodworking machines :

• Before starting, always check the inside of your machine, see if the belts are correctly placed, tighten the bolts, etc. because the various transports cause vibrations.
• Always use an extension cord with a 2.5² wire thickness
• The extension cord must not exceed 10 meters and must not be coiled
• The use of a reel, triplets or multi-socket is PROHIBITED
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the machine warranty
• Always work with the protections in place
• Do not work with dull or blunt tools, this can damage the internal mechanism.