Power feeder for top Maggi STEFF 2032 of quality and European manufacturing!

The other power feeder are Asian-made, only Maggi offers a better product.

The role of the power feeder is to advance the wood without the hands intervening.

This brings a maximum of security, moreover its regularity in the advance of the wood makes it possible to obtain a finishing of much better quality! (decrease of marks and chips). And finally, passing the small parts will not be any problem!

Use: at the top - circular saw - planer 2 possible positions:

• Horizontal for wood lying flat on the table.
• Vertical for woods on the edge.

In addition, the irons or the drill will have a more regular wear and therefore need a less frequent sharpening.

Advantages of the power feeder Maggi STEFF 2032:

• 4 speed range.
• Power feeder by 3 pebbles.
• Walk forward, backwards.
• Working horizontally and vertically.
• Designed for medium and large size machines.

Technical characteristics of this power feeder for top:

• Total height with handle mm: 590
• Width mm: 300
• Total length mm: 850
• Max height of the workpiece mm: 150
• 4 speeds: 4 - 8 - 9 - 18 m / min
• Dimensions of the driving rollers mm: ø 80 x 30
• Single phase motor (50 Hz) 230V
• Power 180 / 120W
• Arm stroke in depth mm: 450
• Movement of the rollers mm: 15
• Wheelbase wheelbase (center to center) 110-85
• Weight kg: 32

Technical characteristics of the stem:

• Max Height: 460 mm
• Max width: 660 mm
• Diameter of the columns: 40 mm
• Base: 4 fixing holes dia 9 mm, 2 holes spacing 63.8 mm + 2 holes spacing 63.8 mm

Click here to watch a demonstration of one of our power feeder

In which cases and why use a power feeder for a spindle moulder?

A spindle moulder power feeder, also known as a mechanical feeder for spindle moulders, is an essential device for improving safety, consistency and productivity during woodworking operations.

Installed above the spindle moulder, this unit automatically feeds wooden workpieces thanks to several motorized rollers that push the piece steadily against the cutting tool.

A spindle moulder power feeder consists of an electric motor connected to several feed rollers mounted on an articulated arm.

These rollers apply constant pressure to the wooden workpiece and move it forward automatically at a constant feed speed.

This system keeps the workpiece firmly pressed against the fence, ensuring a steady feed rate and preventing variations during machining.

The operator no longer needs to push the workpiece manually: the power feeder does the job. The rollers apply consistent pressure on the wood and automatically move it forward at a constant speed.

Consistent machining quality

Thanks to the constant feed speed, the workpiece is machined evenly and without jerks.

This makes it possible to achieve:

• a cleaner finish

• a perfectly consistent profile

• fewer machining defects

Increased productivity

A power feeder allows work to be performed faster and more comfortably.

It is particularly useful for series production, as it guarantees a constant feed rate for all workpieces. This improves production efficiency while reducing operator fatigue.

Better control of difficult workpieces

A power feeder is also very useful when working with long, narrow or difficult-to-hold pieces, as it keeps the workpiece firmly pressed against the fence and the spindle moulder table.