Holzprofi VSHP-AF10 Single-Roller Power Feeder for Bandsaws

The Holzprofi VSHP-AF10 power feeder is specially designed to provide smooth and consistent workpiece feeding during bandsaw resawing operations.

Featuring a large 300 × 30 mm polyurethane (PU) feed roller, this model is intended for bandsaws with wheel diameters of 600 mm or larger.

Its continuously variable feed speed from 1.5 to 18 m/min allows the feed rate to be adjusted to suit different timber sizes, wood species and cutting conditions.

Designed for Bandsaws with 600 mm Wheels or Larger

The Holzprofi VSHP-AF10 is a power feeder specifically designed for use on a bandsaw. It is suitable for machines equipped with wheels of at least 600 mm in diameter.

During resawing operations, the power feeder mechanically advances the workpiece while using the bandsaw's original rip fence to guide the timber.

Its adjustable mounting plate allows the feeder to be positioned to suit different bandsaw configurations.

Large 300 × 30 mm Polyurethane Feed Roller

The VSHP-AF10 is equipped with a 300 × 30 mm polyurethane feed roller.

This large roller provides positive contact with the workpiece and helps maintain a smooth and consistent feed throughout the cutting operation.

The polyurethane surface provides good grip on the timber as it passes through the bandsaw.

Continuously Variable Feed Speed from 1.5 to 18 m/min

The VSHP-AF10 features a continuously variable feed speed from 1.5 to 18 m/min.

This wide adjustment range allows the feed rate to be adapted to the workpiece and the type of cutting operation being carried out.

A consistent mechanical feed provides several advantages:

• constant feed speed throughout the cut;
• more consistent results during resawing operations;
• consistent positioning of the workpiece against the rip fence;
• reduced variations associated with manual feeding;
• easier handling of long workpieces;
• improved repeatability for repetitive operations and production runs.

Ideal for Bandsaw Resawing

The Holzprofi VSHP-AF10 is particularly suitable for resawing timber on a bandsaw.

The power feeder mechanically advances the workpiece and helps maintain a consistent feed speed throughout the cut.

It is therefore particularly useful for workshops regularly processing long workpieces, carrying out resawing operations or performing repetitive cutting tasks.

90 W Induction Motor - 230V Single Phase

The VSHP-AF10 is equipped with a 90 W induction motor operating from a 230V single-phase - 50 Hz power supply.

The variable-speed control allows the feed rate to be continuously adjusted between 1.5 and 18 m/min according to the work being carried out.

Technical Specifications

Which Power Feeder Should You Choose?

The Holzprofi VSHP-AF10 is designed for bandsaws equipped with wheels of 600 mm diameter or larger. For smaller bandsaws, a more compact power feeder may be more suitable.

The choice of power feeder should also take into account the bandsaw table configuration and the space available for correctly installing the mounting plate.

Check Installation Before Ordering

IMPORTANT: BEFORE PURCHASING, check the dimensions of your bandsaw table and the available space for installing and mounting the power feeder.

The Holzprofi VSHP-AF10 is intended for bandsaws with wheel diameters of 600 mm or larger. Please also check the dimensioned drawing shown in the product images to verify the overall dimensions and installation possibilities on your machine.