M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage
  • M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage

M4P by Bernardo FKS1600 Sliding Table Saw with 1600 mm Sliding Carriage - 230V

2,295.00 € Tax included

Including €2.80 for ecotax

Reference: BFKS1600-230V

The M4P by Bernardo FKS1600 sliding table saw is a 230 V single-phase woodworking machine equipped with a 1600 mm aluminium sliding carriage and a 315 mm circular saw blade.

With a maximum cutting height of 100 mm, a 900 mm rip capacity and a 2200 W motor rated for continuous S1 operation, this machine is designed for ripping, crosscutting, panel sizing and mitre cutting.

It features a robust cast iron main table, a sliding carriage with outrigger support table, an extendable crosscut fence and table extensions for improved workpiece support.

Quantity
Factory Shipping, delivery time 7-10 working days

Paiement sécurisé : Visa, Mastercard, CB, PayPal, Alma en 3x, 4x ou 10x, virement bancaire

M4P by Bernardo FKS1600 Sliding Table Saw: A Versatile Woodworking Machine with a 1600 mm Sliding Carriage

The M4P by Bernardo FKS1600 sliding table saw is a woodworking machine designed for accurate ripping, crosscutting, panel sizing and mitre cutting. Equipped with a 1600 mm aluminium sliding carriage, it provides controlled workpiece movement during cutting operations and helps users handle different types of timber and wood-based panels.

Designed for demanding DIY enthusiasts and woodworking workshops equipped with a single-phase electrical supply, this 230 V sliding table saw combines robust construction, practical equipment and adjustable cutting capabilities.

The FKS1600 features a 315 mm circular saw blade, a 2200 W motor rated for continuous S1 operation and a solid cast iron main table. It offers a maximum cutting depth of 100 mm at 90° and a rip capacity of 900 mm to the right of the blade.

Its sliding carriage, outrigger support table and telescopic crosscut fence make it suitable for a wide range of woodworking applications, including furniture manufacturing, panel processing and general joinery work.

1600 mm Aluminium Sliding Carriage for Accurate Panel Cutting

One of the main advantages of the M4P FKS1600 sliding table saw is its 1600 x 240 mm aluminium sliding carriage, designed to guide the workpiece smoothly through the cutting process.

The machine provides a 1600 mm cutting length, making it particularly suitable for sizing panels, crosscutting boards, preparing furniture components and cutting various woodworking materials.

The sliding carriage operates on a hardened prismatic guide system designed to provide smooth and consistent movement during cutting operations.

This arrangement helps improve workpiece control compared with operations carried out entirely on a conventional stationary saw table.

The machine is also equipped with a 600 x 410 mm outrigger support table mounted on a telescopic support arm. This additional table provides support for workpieces during crosscutting and panel sizing operations.

The combination of the aluminium sliding carriage and outrigger table makes the FKS1600 a practical solution for workshops handling medium-sized panels, boards and timber components.

315 mm Saw Blade with a Maximum Cutting Depth of 100 mm

The M4P FKS1600 panel saw is designed to accommodate a circular saw blade with a maximum diameter of 315 mm and a 30 mm bore.

This blade capacity allows the machine to perform a variety of cutting operations in solid wood and wood-based panels, provided that a suitable blade is selected for the material being processed.

The machine offers the following cutting capacities:

  • Maximum cutting depth at 90°: 100 mm.
  • Maximum cutting depth at 45°: 75 mm.
  • Maximum saw blade diameter: 315 mm.
  • Saw blade bore: 30 mm.
  • Blade rotation speed: 4250 rpm.

The machine is supplied with a 315 x 3.2 x 30 mm carbide-tipped saw blade with 24 teeth.

Choosing the correct saw blade is essential for achieving the desired cutting result. A blade intended for ripping solid timber does not necessarily have the same tooth configuration as a blade designed for fine finishing cuts or certain types of panels.

For the best results, always select a blade compatible with the machine specifications, the material being cut and the intended application.

Tilting Saw Blade up to 45° for Bevel Cutting

The M4P FKS1600 sliding circular saw features a tilting saw blade that can be adjusted up to 45° for bevel cutting operations.

The blade inclination is adjusted using a handwheel and graduated scale, allowing the operator to position the blade at the required angle.

This function is particularly useful for joinery work involving angled joints, bevelled edges and the preparation of furniture components.

The available cutting depth varies depending on the blade angle. It reaches 100 mm at 90° and 75 mm at 45°.

For applications requiring high accuracy, it is recommended to verify the blade angle using a suitable measuring instrument before starting the cutting operation.

900 mm Rip Capacity with Parallel Fence

The M4P by Bernardo FKS1600 features a parallel rip fence providing a maximum rip capacity of 900 mm.

This capacity is particularly useful for ripping timber boards, cutting panels to width and preparing different woodworking components.

The rip fence allows the workpiece to be positioned at a controlled distance from the saw blade, helping achieve consistent cutting widths during suitable operations.

The machine is equipped with a 760 x 600 mm right-hand table extension, increasing the available support surface beside the blade.

It also includes a 500 x 350 mm rear table extension, providing additional support for workpieces as they leave the cutting area.

These extensions make the saw more convenient to use when processing materials requiring a larger support surface.

Heavy-Duty Cast Iron Main Table for Stability

The M4P FKS1600 woodworking sliding table saw features a robust 760 x 350 mm grey cast iron main table.

Cast iron is widely used in woodworking machinery because of its rigidity, weight and ability to provide a stable working surface.

The main table incorporates a T-slot designed to accommodate a suitable mitre cutting guide.

With a working table height of 870 mm, the machine can be installed in a woodworking workshop while providing a practical working position.

Its approximate weight of 210 kg contributes to the substantial construction of this sliding table saw.

However, the machine should always be installed on a stable, suitable floor, with sufficient clearance around it for the sliding carriage and the safe handling of timber and panels.

Telescopic Crosscut Fence for Crosscutting and Mitre Cutting

The FKS1600 is equipped with an extendable telescopic crosscut fence designed to support crosscutting and panel sizing operations.

The fence can be adjusted for angled cuts within the manufacturer's specified adjustment range of 90° to 45°.

It is complemented by a flip stop with magnifying reading lens, making it easier to position workpieces for certain repetitive cutting operations.

The outrigger support table and telescopic crosscut fence form a practical assembly for cutting rails, furniture components, panels and other woodworking materials.

For accurate and repeatable results, the fence position, angular settings and locking mechanisms should be checked before use.

Powerful 230 V Single-Phase Motor for Woodworking Workshops

The M4P FKS1600 sliding table saw operates on a 230 V single-phase electrical supply, making it suitable for workshops without access to three-phase electricity.

Its motor provides an output power of 2.2 kW under continuous S1 operation, equivalent to approximately 3 HP.

The manufacturer also specifies a 3.0 kW motor output under S6 operation at 40%, corresponding to approximately 4 HP.

These two power ratings refer to different operating conditions and should not be confused.

This motor allows the machine to perform a wide range of woodworking cutting operations, provided that the feed rate, saw blade and cutting conditions are appropriate for the material.

To maintain reliable operation, it is important to follow the manufacturer's recommendations concerning electrical installation, machine operation and maintenance.

Dust Extraction Connection with 100 mm Diameter Outlet

The M4P FKS1600 sliding table saw features a 100 mm diameter dust extraction outlet.

This connection allows the machine to be connected to a suitable external dust and wood chip extraction system.

The machine is also supplied with a saw blade guard incorporating a dust extraction connection, together with a connecting hose and Y-piece.

Using an appropriate dust extraction system helps reduce the accumulation of sawdust around the cutting area and contributes to better working conditions in the workshop.

For effective extraction, it is important to choose a dust collector with airflow characteristics suitable for the saw and to follow the relevant safety recommendations concerning wood dust.

An external dust extraction unit is not included in the standard delivery.

Technical Specifications of the M4P by Bernardo FKS1600 Sliding Table Saw

Brand M4P by Bernardo
Model FKS1600
Manufacturer reference 3007072
Power supply 230 V single-phase
Motor output S1 (100%) 2200 W / 3 HP
Motor output S6 (40%) 3000 W / 4 HP
Main table dimensions 760 x 350 mm
Sliding carriage dimensions 1600 x 240 mm
Maximum cutting length 1600 mm
Maximum saw blade diameter 315 mm
Saw blade bore 30 mm
Maximum cutting depth at 90° 100 mm
Maximum cutting depth at 45° 75 mm
Blade tilt Up to 45°
Rip capacity with parallel fence 900 mm
Saw blade speed 4250 rpm
Table height 870 mm
Rear table extension 500 x 350 mm
Right-hand table extension 760 x 600 mm
Outrigger support table 600 x 410 mm
Dust extraction outlet Ø 100 mm
Machine dimensions (L x W x H) 2000 x 2500 x 1270 mm
Approximate weight 210 kg
Included saw blade Carbide-tipped 315 x 3.2 x 30 mm – 24 teeth
EAN code 9009468084752

A Versatile Sliding Table Saw for Woodworking and Joinery

Thanks to its various cutting capabilities, the M4P by Bernardo FKS1600 sliding table saw can be used for many woodworking and furniture manufacturing applications.

It is particularly suitable for the following operations:

  • Rip cutting: cutting solid timber boards and wooden components to the required width.
  • Panel sizing: cutting wood-based panels and furniture components to size.
  • Crosscutting: cutting boards and timber across the grain.
  • Bevel cutting: producing angled cuts with the blade tilted up to 45°.
  • Mitre cutting: using the adjustable crosscut fence to prepare angled joints.
  • Furniture manufacturing: preparing panels, rails and other furniture components.
  • Interior joinery: producing wooden elements for various fitting and installation projects.

For each operation, it is important to select a suitable saw blade and use the appropriate fences, protective devices and push sticks.

Standard Equipment Supplied with the M4P FKS1600 Sliding Table Saw

The M4P FKS1600 is supplied with a range of standard equipment designed to facilitate machine setup and cutting operations.

According to the manufacturer's equipment list, the machine includes:

  • A 315 x 3.2 x 30 mm carbide-tipped saw blade with 24 teeth.
  • A saw blade guard with dust extraction connection.
  • A connecting extraction hose with Y-piece.
  • A ripping shoe.
  • A rear table extension.
  • A right-hand table extension.
  • An extendable telescopic crosscut fence.
  • A flip stop with magnifying reading lens.
  • An outrigger support table.
  • Two push sticks.
  • The service tools supplied for the machine.

The aluminium sliding carriage is also an essential part of the standard configuration of this sliding table saw.

As manufacturer photographs may sometimes show optional accessories, the exact standard equipment list should always be used to determine which components are included with the machine.

Why Choose the M4P FKS1600 Sliding Table Saw from Probois Machinoutils?

The M4P by Bernardo FKS1600 sliding table saw is an attractive solution for users looking for a circular panel saw with a sliding carriage without requiring a three-phase electrical supply.

Its 1600 mm sliding carriage, 315 mm saw blade, 100 mm maximum cutting depth and 900 mm rip capacity provide a versatile combination for woodworking and joinery applications.

At Probois Machinoutils, we offer woodworking machinery, tools and workshop equipment for demanding DIY enthusiasts and professional users.

Our team can help you choose suitable machinery, saw blades, cutting accessories and dust extraction equipment for your workshop.

With the M4P FKS1600 230 V sliding table saw, equip your workshop with a versatile woodworking machine for accurate ripping, crosscutting and panel sizing.

BFKS1600-230V
10 Items