Reference: HATR456
The Holzmann ATR456 semi-automatic Morse taper ejector is a practical metalworking accessory designed to facilitate the removal of tools and accessories fitted with an MT4, MT5 or MT6 Morse taper shank.
Designed for taper-shank tool removal operations, this Morse taper extractor is a useful accessory for mechanical workshops and users of compatible machine tools.
Its semi-automatic operation helps facilitate tool removal compared with certain traditional manual methods, provided that the machine and taper connection are compatible.
Main features:

The Holzmann ATR456 semi-automatic Morse taper ejector is a metalworking accessory designed to facilitate the removal of tools and accessories fitted with an MT4, MT5 or MT6 Morse taper shank.
Widely used in machining and mechanical engineering, the Morse taper is a tapered connection system designed to hold different tools in suitable machine tool spindles or sockets.
When a tool needs to be replaced, its tapered shank must be released without damaging the contact surfaces or the machine components.
The Holzmann ATR456 Morse taper extractor provides a practical solution for removing compatible taper-shank tools, particularly in workshops where drilling and machining equipment is used regularly.
Thanks to its compatibility with MT4, MT5 and MT6 Morse tapers, this accessory covers three common taper sizes used on certain machine tools.
A Morse taper ejector is an accessory designed to facilitate the removal of a tool or tool holder secured by a tapered connection.
The Morse taper system relies on contact between two matching tapered surfaces. When a tool is correctly inserted into its socket, this contact helps ensure secure holding and accurate centring.
This system is used with various machining accessories, including taper-shank drill bits, certain drill chucks mounted on suitable arbors and other tools fitted with Morse taper connections.
After use, the taper may remain firmly seated in its socket. Removing it requires an extraction method suited to the machine design and the type of taper connection.
The Holzmann ATR456 semi-automatic Morse taper ejector is intended to facilitate this operation on compatible equipment.
It is a useful accessory for professionals and workshop users who regularly change tools on their machines.
One of the main advantages of the Holzmann ATR456 Morse taper extractor is its compatibility with three Morse taper sizes:
These different designations correspond to the English, German and French names used for Morse taper connections.
Compatibility with several taper sizes allows this accessory to be used in different machining environments, provided that the machine design permits its installation and operation.
Important: compatibility with MT4, MT5 and MT6 does not automatically mean that this ejector is suitable for every machine equipped with one of these tapers. The machine's tool-holding system, extraction mechanism and technical characteristics must also be checked.
In a mechanical workshop, tool changes are part of everyday operations.
Depending on the equipment being used, it may be necessary to remove a taper-shank drill bit, replace a tool holder or dismantle an accessory fitted into a Morse taper socket.
These operations must be carried out carefully to protect the tapered contact surfaces, which play an important role in holding and positioning the tools.
A suitable extraction device can make these operations easier while reducing the need for improvised removal methods.
The Holzmann ATR456 semi-automatic Morse taper ejector is therefore intended for users looking for a dedicated accessory for tool-changing and maintenance operations.
It may be particularly useful in the following environments:
The Holzmann ATR456 is described by the manufacturer as a semi-automatic Morse taper ejector.
This designation distinguishes it from fully manual extraction accessories, such as certain traditional Morse taper drift keys.
The device is intended to facilitate the removal of compatible tapered tool connections when used according to the manufacturer's recommended procedure.
The exact operating method depends on the design of the accessory and its compatibility with the machine concerned.
It is therefore important to consult the relevant operating instructions and verify compatibility before attempting any extraction operation.
The ejector must not be used as a universal dismantling tool or subjected to excessive force on incompatible assemblies.
Morse taper connections are designed to provide precise contact between the tool shank and its corresponding socket.
The tapered surfaces must remain clean and in good condition to maintain their holding and centring characteristics.
When a tool is difficult to remove, using unsuitable equipment may create several risks:
Using a suitable Morse taper ejector, together with the correct operating procedure, helps carry out these operations under better conditions.
It remains essential to follow the machine's safety instructions and support the tool during extraction whenever necessary.
With a net weight of just 0.40 kg, the Holzmann ATR456 semi-automatic Morse taper ejector is a relatively lightweight accessory.
It can be kept close to compatible machines, stored in a workshop drawer or placed in a dedicated storage area for machining accessories.
Its low weight also makes it convenient to handle and put away after use.
The packaging dimensions are 200 x 50 x 50 mm, allowing the accessory to be stored easily alongside other maintenance tools.
These measurements refer to the product packaging and do not necessarily represent the exact dimensions of the ejector itself.
Below are the technical specifications of the Holzmann ATR456 semi-automatic Morse taper ejector:
Before using the Holzmann ATR456 Morse taper ejector, it is important to check that both the machine and the tool to be removed are compatible with this device.
The presence of an MT4, MT5 or MT6 Morse taper alone is not sufficient to guarantee compatibility.
The following precautions are also recommended:
Regular maintenance of Morse taper connections also helps preserve the accuracy and reliability of tool-holding systems.
The Holzmann ATR456 semi-automatic Morse taper ejector is a useful accessory for machine tool users who regularly need to remove tools fitted with tapered shanks.
Its compatibility with MT4, MT5 and MT6 Morse tapers covers several taper sizes, provided that compatibility with the machine concerned has been verified.
Its 0.40 kg net weight and compact format make it easy to store alongside other mechanical and machining accessories.
At Probois Machinoutils, we offer a selection of metalworking machines and accessories, including pillar drills, drilling and milling machines, drill chucks, drill chuck arbors, taper-shank drill bits and various machining accessories.
Choose the Holzmann ATR456 semi-automatic Morse taper ejector to facilitate the removal of MT4, MT5 and MT6 taper-shank tools on compatible machine tools.