Reference: TORMEK-SVP80
The Tormek SVP-80 Moulding Knife Jig is designed for precise sharpening of profiled spindle moulder knives, regardless of the shape of their cutting profile.
Thanks to its magnetic holding system and positioning pins, it securely holds the knives while their flat surface is sharpened. It accepts knives up to 100 mm wide, with mounting hole spacing of 24, 30, 36 or 38 mm.
Also suitable for certain profiled paint scrapers, this jig is compatible with Tormek T-4 and T-8 wet sharpening systems, as well as several compatible older models. An additional US-105 Universal Support is included.

The Tormek SVP-80 Moulding Knife Jig is a sharpening accessory specifically designed for maintaining profiled knives used on woodworking spindle moulders. It restores the cutting edge by sharpening the flat face of the knife, without requiring the user to manually follow the curves and details of its cutting profile.
Developed by Tormek, a specialist in wet sharpening systems, this jig provides a practical solution for joiners, cabinetmakers and woodworking professionals who regularly use moulding knives to produce decorative profiles, grooves and shaped edges.
Thanks to its patented design, the Tormek SVP-80 enables consistent sharpening across the flat surface of the knife. This helps preserve the original cutting profile while restoring the sharpness of the cutting edge.
Compatible with Tormek T-4 and T-8 wet sharpening systems, this jig is a useful addition to workshops looking to maintain their woodworking cutting tools.
Spindle moulder knives are used for various profiling operations on solid wood and suitable wood-based panels.
Depending on their shape, they can produce decorative mouldings, rebates, grooves and profiles used for assembling wooden components.
Their cutting edges may feature curves, angles and complex shapes that make freehand sharpening particularly difficult.
The Tormek SVP-80 simplifies this operation through a specific sharpening method: instead of working directly on the cutting profile, it sharpens the flat surface behind the cutting edge.
This technique allows different knife profiles to be maintained without having to reproduce every curve of their geometry.
The result is a consistent sharpening process that helps restore clean, precise cutting performance during spindle moulding operations.
The main feature of the Tormek SVP-80 is its distinctive sharpening principle.
The jig positions the moulding knife so that its flat face, located behind the cutting edge, can be sharpened.
This method offers an important advantage for profiled knives: it eliminates the need to follow the complex shapes of the cutting profile directly during sharpening.
The different curves and cutting angles of the knife can therefore be preserved, provided that the tool is not significantly damaged or deformed.
This system is particularly useful for knives designed to produce decorative mouldings or profiles featuring several different curves.
It also allows consistent sharpening across the entire width of the knife, within the dimensional limits of the jig.
The Tormek SVP-80 accepts moulding knives up to 100 mm wide.
The Tormek SVP-80 Moulding Knife Jig is designed to accommodate different types of spindle moulder knives with compatible positioning holes.
It accepts the following hole spacings:
These different mounting options allow the jig to be used with several formats of profiled moulding knives.
Before purchasing, it is important to check both the mounting hole spacing and the width of your spindle moulder knives.
Compatibility also depends on the geometry of the knife and whether it can be positioned correctly in the jig.
The Tormek SVP-80 features a steel plate equipped with a magnetic insert containing several positioning holes.
This system makes it easier to install moulding knives before sharpening.
The user can identify the holes corresponding to those on the knife and insert the supplied positioning pins into the appropriate locations.
The knife is then held by the magnetic insert and accurately positioned using the pins.
This design helps keep the knife correctly positioned while working against the grinding wheel and reduces unwanted movement.
The holding system is particularly practical for users who own several sets of moulding knives with different dimensions and profiles.
It simplifies tool changes and makes it easier to prepare for another sharpening operation.
The Tormek SVP-80 Moulding Knife Jig features a patented design intended to provide consistent flat grinding across the knife surface.
Its frame incorporates two sliding strips that reduce friction and facilitate movement during sharpening.
This design allows the jig to move smoothly while maintaining controlled contact between the knife and the grinding wheel.
Users can therefore more easily feel when the knife comes into contact with the abrasive surface.
This sensitivity improves control during sharpening and helps limit unnecessary material removal.
Consistent sharpening contributes to maintaining similar cutting geometries between knives belonging to the same set, provided that the tool manufacturer's recommended settings and procedures are followed.
Properly sharpened spindle moulder knives are essential for producing clean, consistent profiles during woodworking operations.
When cutting edges become dull, several problems may occur:
Regular knife maintenance helps restore cleaner cutting performance and improve the finish of machined wooden components.
The Tormek SVP-80 allows this maintenance to be carried out directly in the workshop, provided that the knives are compatible and suitable for resharpening.
It is therefore a useful accessory for joiners and cabinetmakers who want to extend the service life of their resharpenable cutting tools.
The Tormek SVP-80 is not limited to sharpening spindle moulder knives.
It can also be used to sharpen certain profiled paint scrapers whose geometry is compatible with its holding system.
These scrapers are commonly used to remove old paint, varnish and other coatings from surfaces with particular shapes.
Their cutting edges may feature curves and profiles that are difficult to maintain manually.
Thanks to its flat-face sharpening principle, the SVP-80 can restore their cutting performance without requiring the user to follow each curve of the profile directly.
This capability extends the applications of the jig to woodworking renovation and restoration projects.
The Tormek SVP-80 Moulding Knife Jig is designed for use with Tormek wet sharpening systems.
It is compatible with:
Tormek wet sharpening systems operate at low speed while the grinding wheel is continuously cooled by water.
This process reduces the risk of overheating the cutting edge during sharpening and helps preserve the properties of the tool steel.
The SVP-80 is supplied with an additional Tormek US-105 Universal Support, which is required for its operating configuration.
Before installing the jig on an older Tormek sharpening machine, it is advisable to check compatibility with the specific model.
The Tormek SVP-80 Moulding Knife Jig is supplied fully assembled and ready to be installed on a compatible sharpening machine.
The package includes:
Spindle moulder knives and the wet sharpening machine are not included.
The Tormek SVP-80 is a particularly useful solution for woodworking professionals and enthusiasts who want to maintain their profiled spindle moulder knives.
Its main advantage is the ability to sharpen the flat face of the knives, regardless of the shape of their cutting profile.
This method allows different profiles to be maintained with a single jig while helping preserve their original geometry.
Thanks to its magnetic holding system, positioning pins and sliding frame, it provides secure knife positioning and controlled guidance during sharpening.
Its compatibility with Tormek T-4 and T-8 wet sharpening systems makes it a valuable accessory for workshops already equipped with Tormek sharpening machines.
It can also be used to maintain certain profiled paint scrapers, further increasing its versatility.
Choose the Tormek SVP-80 Moulding Knife Jig to maintain compatible profiled knives, restore efficient cutting edges and improve the surface finish of your spindle moulding work.