Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools
  • Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools

Tormek SVS-50 Multi Jig for Sharpening Woodturning Tools

74.99 € Tax included

Reference: TORMEK-SVS50

The Tormek SVS-50 Multi Jig is designed for precise sharpening of various woodturning tools, including straight and oval skew chisels, beading and parting tools, roughing gouges and certain woodcarving tools.

Featuring two interchangeable housings, one open and one closed, it accommodates different tool shapes and helps produce consistent, symmetrical bevels.

Compatible with Tormek T-4 and T-8 wet sharpening systems, as well as several compatible older Tormek models.

Quantity
Delivery time 12-15 working days

Paiement sécurisé : Visa, Mastercard, CB, PayPal, Alma en 3x, 4x ou 10x, virement bancaire

Tormek SVS-50 Multi Jig: A Versatile Sharpening Accessory for Woodturning Tools

The Tormek SVS-50 Multi Jig is a versatile sharpening accessory specifically designed for precision sharpening of various woodturning and woodcarving tools. Thanks to its innovative design featuring two interchangeable housings, it securely holds different types of tools and makes it easier to reproduce their cutting geometry.

Designed for use with Tormek wet sharpening systems, this jig is particularly useful for woodturners who want to maintain their skew chisels, beading and parting tools, roughing gouges and certain woodcarving tools.

Its design helps control tool positioning during sharpening and maintain a consistent bevel angle. It is therefore a valuable accessory for achieving precise cutting edges and extending the useful life of cutting tools.

Two Sharpening Jigs in One Accessory

The main advantage of the Tormek SVS-50 lies in its versatile design. It consists of a main body and two interchangeable housings:

  • A closed housing, primarily intended for skew chisels and certain straight-edged tools.
  • An open housing, suitable for roughing gouges, beading tools, parting tools and certain woodcarving tools.

These two holding systems allow several types of tools to be sharpened using a single jig, reducing the need for multiple sharpening accessories.

The housings are secured by a clamping system that also allows their orientation to be adjusted and locked.

This versatility makes the SVS-50 Multi Jig a particularly useful addition to any woodturning workshop.

Sharpening Woodturning Skew Chisels with the Tormek SVS-50

Woodturning skew chisels generally have two bevels that must be sharpened symmetrically to ensure consistent cutting performance.

The closed housing of the Tormek SVS-50 holds the tool vertically and centres it within the jig.

Once the first bevel has been sharpened, the jig can simply be turned over to sharpen the opposite side without repositioning the tool.

This design makes it easier to achieve two symmetrical bevels and helps minimise differences in angle between the two sides.

The jig accommodates both rectangular and oval skew chisels, with straight or rounded cutting edges, within the dimensional limits specified by Tormek.

The maximum skew chisel width is 32 mm.

Sharpening Jig for Woodturning Roughing Gouges

Roughing gouges are commonly used to transform a square or irregular wooden blank into a cylindrical shape during the initial stages of spindle turning.

Their cutting edges must be maintained regularly to ensure effective cutting and reduce the effort required when using the tool.

The open housing of the Tormek SVS-50 holds roughing gouges securely and guides them across the grinding wheel.

This system is particularly suitable for tools with a straight blade shape along their length.

Depending on the dimensions and geometry of the tool, the jig can also be used for certain woodcarving gouges.

The maximum width specified for roughing gouges is 50 mm.

Sharpening Beading Tools and Parting Tools

The Tormek SVS-50 Multi Jig is also suitable for sharpening certain beading and parting tools used in woodturning.

These tools require a properly sharpened cutting edge to create grooves, separate workpieces and carry out detailed shaping operations.

The open housing holds the tool in a stable position while it passes over the grinding wheel.

Regular sharpening helps improve cutting quality and maintain the geometry required for accurate tool performance.

It is important to respect the recommended cutting angle for each tool and check that its dimensions are compatible with the jig.

Also Suitable for Certain Woodcarving Tools

In addition to woodturning tools, the Tormek SVS-50 can be used to sharpen certain woodcarving tools.

The open housing can accommodate wide woodcarving gouges with straight or tapered shanks, as well as certain straight or skewed carving chisels.

For woodcarving gouges, Tormek specifies a width range of 25 to 50 mm, depending on the tool shape.

This versatility allows users involved in several woodworking activities to use the same accessory for different sharpening operations.

Precise Adjustment for Repeatable Sharpening Angles

One of the main advantages of the Tormek SVS-50 sharpening jig is its ability to help reproduce sharpening settings.

The holding system allows the position of the tool to be controlled in relation to the universal support of the sharpening machine.

The housings can be adjusted and locked at angles between 0° and 45°, according to the adjustment possibilities specified by the manufacturer.

To reproduce previous sharpening settings more easily, Tormek recommends combining the SVS-50 with the TTS-100 Turning Tool Setter.

This combination makes it easier to reproduce the cutting geometry and bevel angle of woodturning tools.

By maintaining consistent settings, regular sharpening can be carried out while limiting the amount of steel removed during each operation.

The TTS-100 Turning Tool Setter is an optional accessory and is not included with the SVS-50.

Compatible with Tormek T-4 and T-8 Wet Sharpening Systems

The Tormek SVS-50 is designed for use with Tormek wet sharpening machines equipped with a compatible universal support system.

It can be used with the following models:

  • Tormek T-4.
  • Tormek T-8.
  • Several compatible older Tormek sharpening systems.

The jig is mounted on the universal support of the sharpening machine, which guides the movement of the tool during sharpening.

Before using it with an older machine or a different sharpening system, the compatibility of the mounting arrangement should be checked.

Use with a Bench Grinder and the Tormek BGM-100 Kit

The SVS-50 Multi Jig can also be used with a conventional bench grinder when combined with the Tormek BGM-100 Bench Grinder Mounting Set.

This arrangement is particularly useful for the initial shaping of tools when a significant amount of metal needs to be removed.

After this operation, the final sharpening can be carried out on a Tormek wet sharpening system to achieve a precise cutting edge.

However, sharpening on a dry bench grinder requires particular care to avoid overheating, which could damage the cutting edge.

The BGM-100 mounting kit is sold separately.

Technical Specifications of the Tormek SVS-50 Multi Jig

  • Brand: Tormek.
  • Manufacturer reference: SVS-50.
  • Product type: Multi-purpose sharpening jig.
  • Main application: Sharpening woodturning tools.
  • Additional applications: Certain woodcarving tools.
  • Design: Main body with two interchangeable housings.
  • Housings: One open housing and one closed housing.
  • Maximum skew chisel width: 32 mm.
  • Maximum roughing gouge width: 50 mm.
  • Woodcarving gouges: 25 to 50 mm wide, depending on their shape.
  • Housing angle adjustment: 0° to 45°.
  • Compatibility: Tormek T-4, T-8 and several compatible older models.
  • Materials: Precision-cast zinc and black composite.
  • Colour: Grey and black.
  • Shipping weight: Approximately 0.45 kg.

What's Included with the Tormek SVS-50?

The Tormek SVS-50 Multi Jig is supplied fully assembled and ready for use with a compatible sharpening machine.

The package includes:

  • The Tormek SVS-50 Multi Jig with its two interchangeable housings.
  • Operating instructions.
  • A sheet of nine Tormek PL-01 labels for recording tool settings, together with the relevant instructions.

Additional accessories such as the TTS-100 Turning Tool Setter and the BGM-100 Bench Grinder Mounting Set are not included in the standard package.

Why Choose the Tormek SVS-50 Multi Jig?

The Tormek SVS-50 is a versatile solution for woodturners and users who want to maintain several types of cutting tools with a single sharpening jig.

Thanks to its two interchangeable housings, it adapts to different tool geometries and makes consistent sharpening easier.

Its design is particularly useful for sharpening skew chisels, as the jig can simply be turned over to sharpen the second bevel without changing the clamping position.

When used with a Tormek wet sharpening system and, where required, the TTS-100 Turning Tool Setter, it helps reproduce sharpening angles and preserve tool geometry over successive sharpening sessions.

Choose the Tormek SVS-50 Multi Jig to maintain your woodturning tools, improve sharpening consistency and make the most of your Tormek sharpening system.

TORMEK-SVS50
100 Items