Main function

The 6-inch chainsaw chain for Scheppach pruning saws – Ref. 7904201713 is designed to cut wood using its sharp cutting teeth driven around the guide bar.

Installed on a compatible Scheppach pruning saw, it allows branches to be cut, pruning work to be carried out and trees and shrubs to be maintained.

Driven by the machine's motor, the chain travels at high speed around the guide bar. Its cutting teeth penetrate the wood and progressively remove material to ensure efficient cutting.

Its 6-inch length, approximately 15 cm, is suitable for cutting operations performed with compatible mini chainsaws and pruning saws.

A properly sharpened, tensioned and lubricated chain ensures clean, consistent and precise cuts while reducing strain on the motor and drive system.

A chain in good condition is essential for maintaining cutting performance and ensuring reliable and safe operation of the Scheppach pruning saw.

It is important to check that the chain pitch, gauge and number of drive links match the specifications of the machine's guide bar and sprocket.

When should the chainsaw chain be replaced?

The 6-inch chainsaw chain for Scheppach pruning saws – Ref. 7904201713 should be replaced in the following cases:

• Severely worn or damaged cutting teeth

• Chain no longer cuts properly despite appropriate sharpening

• Broken, cracked or deformed cutters

• Chain stretched excessively, preventing correct tension adjustment

• Damaged, seized or excessively worn links

• Chain frequently comes off the guide bar despite correct tension

• Uneven cutting or abnormal cutting deviation due to chain wear

• Unusual vibrations during cutting

• Chain damaged after contact with a stone, nail or another hard object

• Cutting teeth have reached the sharpening limits recommended by the manufacturer

A worn or damaged chainsaw chain can reduce cutting performance, place additional strain on the motor and increase the risk of kickback or derailment.

When replacing the chain, it is also recommended to check the condition of the guide bar, drive sprocket and lubrication system to ensure optimal operation.

It is essential to use a chain with the same pitch, gauge and number of drive links as specified for the Scheppach pruning saw. The 6-inch length alone is not sufficient to guarantee compatibility.

Warning: A chain with cracked, broken or severely damaged links must never be reused. Before carrying out any maintenance, switch off the machine and remove its battery or disconnect it from the power supply.

This 6-inch chainsaw chain for Scheppach pruning saws is compatible with the following models:

• Scheppach BC-PS150-X — from 03/2024 onwards

• Scheppach BC-BGS150SR-X — from 03/2024 onwards