Guide 10" Scheppach PROCUT for chainsaw
Guide 10" Scheppach PROCUT for chainsaw ref 7910100740
Reference: KPD7910100739
10-inch chainsaw chain Scheppach Procut Ref. 7910100739 for Scheppach, Parkside and Woodster chainsaws

The 10-inch Scheppach Procut chainsaw chain for Scheppach, Parkside and Woodster chainsaws – Ref. 7910100739 is designed to cut wood using its sharp cutting teeth, which move around the guide bar.
Fitted to a compatible chainsaw or pole pruner, it allows branches to be cut, pruning work to be carried out and pieces of wood to be cut according to the machine's capabilities.
Driven by the motor, the chain moves at high speed around the guide bar. Its cutting teeth penetrate the wood and progressively remove material to ensure efficient cutting.
A properly sharpened, tensioned and lubricated chain ensures consistent and precise cutting while reducing strain on the motor and transmission system.
The 10-inch Scheppach Procut chain is an essential component of the cutting system. Keeping it in good condition helps maintain cutting performance and ensures the safe operation of the chainsaw or pole pruner.
It is important to check that the chain pitch, gauge and number of drive links match the specifications of the machine's guide bar and sprocket.
The 10-inch Scheppach Procut chainsaw chain for Scheppach, Parkside and Woodster chainsaws – Ref. 7910100739 should be replaced in the following cases:
Cutting teeth heavily worn or damaged
Chain no longer cuts properly despite appropriate sharpening
Broken, cracked or deformed cutting teeth
Chain excessively stretched, preventing correct tension adjustment
Damaged, seized or excessively worn links
Chain regularly comes off the guide bar despite correct tension
Uneven cutting or abnormal cutting deviation
Excessive vibrations during cutting
Chain damaged after contact with a stone, nail or another hard object
Cutting teeth have reached the sharpening limits recommended by the manufacturer
A worn or damaged chainsaw chain can reduce cutting performance, place additional strain on the motor and increase the risk of kickback or derailment.
When replacing the chain, it is also recommended to check the condition of the guide bar, drive sprocket and lubrication system.
It is essential to use a chain with the same pitch, gauge and number of drive links as specified for the machine.
Warning: A chain with cracked, broken or severely damaged links must never be reused.
Scheppach CSP2540 — from 05/2019
Scheppach CSP2541 — from 05/2019
Scheppach CSP2542
Scheppach PCS26
Scheppach PCS26O
Parkside PBBPS 700 A1
Parkside PBBPS 700 A2 — from 2024
Woodster CSP10 — from 05/2019
Woodster CSP10 Procut — from 05/2019
Woodster CSW10P
Guide 10" Scheppach PROCUT for chainsaw ref 7910100740
10-inch chainsaw chain Scheppach Procut Ref. 7910100739 for Scheppach, Parkside and Woodster chainsaws