The planer and thicknesser Leman RAD310 will delight its users by the length of its tables!
Dedicated to the handyman and amateur anxious to afford a good material for an interesting budget, it is equipped with regrindable irons. It is therefore possible to equip this jointer with carbide irons, the recommended quality for hard and abrasive wood because it is much more efficient.
Its large worktables are the major asset of this Leman RAD310 machine!
Important recommendation of Probois for many woodworking machines:
Before starting always check the inside of the machine, see if the belts are correctly fitted, tighten the bolts, grease the tables, etc. because the different transports cause vibrations.
Always use an extension cord of 2.5² wire size
The extension must not exceed 10 meters and must not be rolled
Provide an electrical meter with special fuses at least 16A starting
Have a standard electric meter with neutral and earth
Always work with a chip vacuum cleaner for your health and machine warranty
Do not work with blunted or dulled irons it can damage the mechanism, the advance of the planer, break the belt
General description of planer and thicknesser Leman RAD310 :
Built in welded mechanics, rigid and robust.
2200 W motor power with brake.
Planing and planing width 310 mm - planing height up to 220 mm.
Cast iron facing tables with adjustable anti-noise lips, with a total length of 1800 mm.
Guide made of profiled aluminum mounted on a rail of round steel cast, rigid and largely sized, tilting at 45 °,.
Passage planing by raising the tables, no need to disassemble the guide - opening butterfly with powerful hinges.
Planing table in cast iron mounted on 1 central shaft Ø 110 and maintained at the outlet by a 2nd barrel.
Automatic advance disengaged.
Chip collector with suction outlet Ø 100, planarization passage by simple pivoting with automatic positioning of the suction flap.
Depth up to 5 mm in planing and 2.5 mm in planing.
This planer and thicknesser Leman RAD310 comes with:
Parallel Guide
Bridge Protector
Mobile chip sensor for suction
1 set of irons set in position
Service Keys
Push
Technical specifications of the planer Leman RAD310:
Motor power (230V - 50 Hz): 2200 W - 3 HP
Overall dimensions (LxWxH): 1800 x 890 x 970 mm
Speed of rotation of the shaft: 4000 rpm
Diameter of the tree: 95 mm
Number of shoes: 4
Iron dimensions (mm): 310 x 30 x 3.0
Threaded shaft for mandrel adapter: M20x1,5 mm
Diameter of the drive rollers: 40 mm
Suction outlet: diameter 100 mm
PLANING:
Width of planing: 310 mm
Table dimensions (LxW): 1800 x 315 mm
Dimensions of the guide (LxH): 1115 x 130 mm
Inclination of the guide: from 90 ° to 135
Depth: 0 to 3 mm
Working height: 820 mm
FLATTENING:
Planing width: 310 mm
Planing height: 220 mm
Depth: up to 3 mm
Feed speed: 8 m / min
Table dimensions (LxW): 750 x 310 mm
Net Weight: 310 kg
Good to know: Three-phase machines (3-phase, neutral and earth) are usually delivered without a plug. When mounting, be careful not to connect the wires upside down to avoid damaging the mechanical system! See the correct outlet: electrical outlet three-phase.
VERY IMPORTANT FOR DELIVERY!
The delivery of this very heavy planer jointer (about 350 kg) requires a big truck with rags! The place of delivery must be provided so that the truck can approach easily. In the case of a delivery location which is difficult to access, we must inform us so that we can order a smaller truck but delivery charges will apply for this special request. Delivery charges must be paid before shipment.
The machine arrives in a wooden crate. Our prices do not include assembly or installation. It is advisable to have your electrical installation checked by a professional to make sure that it can support the power of this machine so as not to damage it by an unsuitable meter.
.png)
