The Bernardo CWM260F Wood Combination offers 6 essential woodworking operations!

This is the ideal handset for the do-it-yourselfer and seasoned enthusiast who can plan, plan, saw, cut, tenon and mortise at home even in a small space thanks to its compact size!

The Bernardo CWM260F wood combination with 1600 mm trolley, only available in three-phase, is the same machine as the wood combined machine Jean l'ébéniste COMB250 in single phase but with a longer carriage.

Important recommendation from Probois for many woodworking machines such as this handset:

• Before starting always check the inside of the machine, see if the belts are correctly fitted, tighten the bolts, grease the tables, etc. because the different transports cause vibrations.
• Always use an extension cord of 2.5² wire size
• The extension must not exceed 10 meters and must not be rolled
• Provide an electrical meter with special fuses at least 16A starting
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and machine warranty
• Always grease the cast iron tables with slip-wood
• Always work with the protections in place
• Do not work with blunted or dulled irons it can damage the mechanism, the advance of the planer, break the belt
• The machine does not start? No doubt the chip ejector housing is poorly positioned on the planer jointer, it is a safety!

General description of the Bernardo CWM260F wood combination:

• Motors: 230V / 50Hz; 2Kw / 2,5CV for de-planer, 2,2Kw / 3CV for router and circular saw.
• Built-in cast-iron dehulling tables allow easy access to the planing function.
• Protective cover for optimum chip evacuation.
• The table is held by a central steel shaft and a guide bar.
• The Plow-Plane can be easily separated from the saw router for handling purposes and in a 600 mm door.
• Large aluminum alignment guide for easy and precise adjustment from 45 ° to 90 °.
• Retractable protective deck provides safety during machining and easy access to all 3 irons.
• The tree with 3 irons gives a remarkable surface state.
• Striated drive roller and anti-rejection latches.
• Anti-noise Lenses Series.Reduces noise by about 10 dB (A) Laeq.
• Chariot aluminum blade. Precise guidance by steel balls on steel tracks.
• Adjustable incisor for smooth cutting of coated panels (laminate, melamine, veneer, plywood ...).
• Stable and rigid trolley frame for formatting large panels.
• Telescopic ruler with stop for: Square cut, miter cut from 0 to 45 ° and tenoning.
• Tab guide with shelf 300 x 245 mm, angle from -45 ° to 45 °, expandable guide up to 700 mm attaches to the carriage.
• Parallel guide in 2-position aluminum: For straight cut and angle cut from 0 to 45 °.
• Easily accessible and easy-to-use control panel, ergonomic guides.
• The steering wheels are equipped with a folding handle avoiding any gene.
• Safety router guide with aluminum bars, horizontal and vertical press for optimum protection during machining.
• Micrometric adjustment of the output guide.
• Slotting mortiser, cast iron table, easy and precise adjustment. High capacity chuck (Ø16mm) type WESCOTT.
• Weight: 390 kg

Technical characteristics of each operation of the Bernardo CWM260F handset:

Scaling - planing:

• Total length tables: 1085 mm
• Table width - planing width: 250 mm
• Long. planing table: 600 mm
• Tilt guide inclination: 0 - 45 °
• Planing height: 190 mm
• Diameter of the tree: 75 mm
• Number of shoes: 3
• Advance speed disengageable: 8 m / min
• Chip taking max. dew: 4
• Chip taking max. planing: 3
• Rotation of the tree: 4000 rpm
• Diameter of the suction nozzle: 100 mm
• Working height: 1080 mm
• 400V motor of 2.0 KW (2.7CV)

Mortiser:

• WESCOTT type mandrel 0 - 16 mm - Rotate left
• Vertical table run 80 mm
• Horizontal table run 160 mm
• Course depth 100 mm
• Table dimensions 368 x 161 mm

Toupie - tenoning:

• Dimensions cast iron table 1045 x 300
• With lacquered sheet metal extension 1325 x 300
• Dimensions work surface 1325 x 300
• Diameter of the shaft 30 mm
• Well diameter 150 mm
• Max. tool in the housing 165 mm
• Race / height of the tree 130/108
• 3 speeds per pulley 3500 - 5500 - 7000 rpm
• 400V motor of 2,2 KW (3 HP)

Sawing:

• Aluminum trolley dimensions 1600 x 240
• Dimensions work surface 1080 x 790
• Dimensions cast iron table 1045 x 300
• Cart frame dimensions 600 x 420
• Rule expandable to 2 m
• Cut width parallel guide 550 mm
• Runner blade stroke 1600 mm
• Diameter of the blade 250 mm
• Diameter of the scorer 80 mm
• Cutting height at 45 ° and 90 ° 65 and 45 mm
• Blade speed 4050 rpm
• Speed ​​of the scorer 6300 rpm
• 400V motor of 2,2 KW (3 HP)

Also think about the travel kit so you can easily move your handset if it does not have a definitive place in your shop.

This Bernardo CWM260F wood combination is also available with a longer trolley in 1200 mm: see by clicking here!