Grooving cutter adjustable 5 to 9.5 mm Ø120 mm for spindle moulder shaft 30 mm
Adjustable grooving cutter with TC reversible blades to create precision slots and grooves
Combined wood chucks and routers are very largely manufactured with a 30 mm router shaft. Small or large, these machines experience differences in the depth and diameter of their wells and the height of their trees.
That's why router tool manufacturers develop the same tool in different cutting diameters and cutting heights: so for every router, it's important to choose the right tool holder or the right solder.
The work at the router is also, various essential accessories such as the sanding cylinder, the working guide to the shaft, the bar guide or simply millimetric rings, adjustment or guide ball. The list is long as the job at the router is rich, the simplest is to discover these tools and accessories here at Probois Machinoutils!
Tools are essential in carpentry, the multifunction tool holder for example is one of them, it allows to work the wood offering dozens of different moldings through profiled irons height 40 and 50 mm. Then come the toolholders to crease, leaf, tenon, calibrate, bouveter, flower bed, etc ...
Active filters
Adjustable grooving cutter with TC reversible blades to create precision slots and grooves
Intermediate cutter of 7,5 mm for adjustable grooving cutter to create precision slots and grooves
Adjustable grooving cutter with TC reversible blades for rebating and groove
Grooving cutter with TC reversible blades for rebating and groove
Grooving cutter with TC reversible blades for rebating and groove
Planing and jointing spiral cutter head diameter 62 mm height 80 mm for spindle moulder
Raised panel cutter head diameter 150 mm to make raised panels on furniture- and kitchen furniture doors.
2 TC panel raising blade Form n° 2 - Version Top
Set of 2 TC profile knives form 1 for profile and counter-profile cutter
Set of 2 TC profile knives form 2 for profile and counter-profile cutter
Set of 2 TC profile knives form 3 for profile and counter-profile cutter
Set of 2 TC profile knives form 4 for profile and counter-profile cutter
45° chamfer cutter head carry out clean accurate bevels and joints, delivered with screw M14
Cutter head for glue joints retained by friction in hard and soft textured wood with TC blades 3 teeth
2 TC profile knives for Mitre glue joint cutter head 45º
Adjustable chamfer cutter head with positive stop adjustable on both sides from 0 to 45°, with positive stop every 7,5° step
Ball bearing diameter 62 mm width 16 mm for spindle moulder bore 30 mm to use with tool and butting ring
Safety disk 68 mm essential at the butting ring to block the ball bearing
Butting ring diameter 75 mm for spindle moulder 30 mm
Butting ring diameter 85 mm for spindle moulder 30 mm
Butting ring diameter 110 mm for spindle moulder 30 mm
Butting ring diameter 120 mm for spindle moulder 30 mm
Butting ring diameter 125 mm for spindle moulder 30 mm
The "Multicurve" or "Multichantournage" allows you to quickly and very cleanly carry out all your fretwork jigs with a router or router and that with extreme ease!
For old-fashioned router grooving operations, extendable from 1.5 to 3 mm, this patented grooving blade holder is ingenious! To be mounted on a 30 mm spindle moulder.
Carbide circular saw blade 8 teeth 3 mm thick specially designed for the Dimar-Flury extendable grooving blade holder
Carbide circular saw blade 8 teeth 1.5 mm thick specially designed for the Dimar-Flury extendable grooving blade holder
Abrasive Bobbin sleeve diameter 73 mm for sanding cylinder height 100 in Grit 120
Abrasive Bobbin sleeve diameter 73 mm for sanding cylinder height 100 in Grit 80
Set of 7 carbide blades for making grooves on a circular saw or on a router.
Adjustable grooving cutter with TC reversible blades to create precision slots and grooves
Adjustable grooving cutter with TC reversible blades for rebating and groove
Ball bearing diameter 55 mm width 13 mm for spindle moulder bore 30 mm to use with tool and butting ring
Butting ring diameter 90 mm for spindle moulder 30 mm - - Leman 970.5.090.55.00
This Profile and counter profile cutter head has been designed to make furniture and doors on soft and hardwood.