M14 × 40 mm Bolt for Ø30 mm Spindle Moulder Shaft

This M14 × 40 mm bolt is designed for securing tooling mounted on a Ø30 mm spindle moulder shaft.

Fitted at the end of the spindle, it helps to secure the cutter block, spindle rings and other tooling components installed on the spindle moulder.

It is an important part of the tooling clamping system and must match the thread at the end of the spindle.

M14 Fixing Bolt - 40 mm Long

This bolt features an M14 thread and a length of 40 mm. It has a hexagonal head for tightening with a suitable spanner or socket.

It can be used to replace an original bolt that is damaged, worn, lost or no longer provides reliable clamping of the tooling.

For Ø30 mm Spindle Moulder Shafts

This bolt is intended for Ø30 mm spindle moulder shafts equipped with the corresponding M14 thread.

The spindle diameter alone is not sufficient to determine compatibility. The end thread may differ depending on the machine brand, model and production period.

Technical Specifications

When Should the Spindle Bolt Be Replaced?

Replacement is recommended if the bolt head is damaged or deformed, if the thread shows signs of wear, or if the bolt no longer provides correct and reliable clamping of the tooling.

A damaged bolt should never be forced into the spindle, as this could also damage the internal thread of the spindle shaft.

Check the Thread Before Ordering

IMPORTANT: BEFORE PURCHASING, check the dimensions and thread of the bolt currently fitted to your machine.

This bolt has an M14 thread and a length of 40 mm. A Ø30 mm spindle diameter alone does not guarantee compatibility.

Before ordering, compare the thread diameter, bolt length and head type with the original part fitted to your machine.