General description of the planer thicknesser Holzprofi DR250:

• Cast iron table Simultaneous opening
• Length: 1050 mm
• Planing width: 250 mm
• Planing height: 185 mm
• Planing table: 600 x 250 mm
• Perpendicular guide: 950 x 152 mm
• Shaft Ø: 7 5mm with 2 propellers fitted with 24 carbide inserts 15 x 15 x 2.5 mm with rounded corners
• Feed speed: 4.8 m / min.
• Maximum chip grip: 3 mm for planing / 2.5 for planing
• Weight: 170 kg
• Brake motor: 2kw / 2.5 CV / 50Hz / Mono 230V
• Rotation: 4000t / min
• Ø of the suction nozzle: 100 mm
• CE compliant
• Dimensions: 1,100 x 590 x 20 mm
• Packaging: 1150 x 590 x 950 mm / 190 kg
• Delivered with a 200X425mm table extension for entry and exit table for jointing or planing part

Important recommendation from Probois for many woodworking machines:

• Before starting, always check the inside of your machine, see if the belts are put on correctly, tighten the bolts, etc. because different transports cause vibrations.
• Always use an extension cord with a 2.5² wire size
• The extension cord must not exceed 10 meters and must not be coiled
• The use of drums, triplets or multi-grips is PROHIBITED.
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the warranty of the machine
• Always grease cast iron tables with wood slider
• Always work with protections in place
• Do not work with unsharpened or dull irons, this can damage the mechanism, the feed of the planer, break the belt