Planer and thicknesser 250 mm Bernardo ADH250 has its place in the category of mid-range machines!

Dedicated to the handyman and amateur concerned with affording a good material for an interesting budget, it is equipped with resharpenable irons. It is therefore possible to equip this jointer with carbide irons, the quality recommended for hard and abrasive wood because it is much more efficient.

Important recommendation from Probois for many woodworking machines:

• Before starting, always check the inside of your machine, see if the belts are correctly fitted, tighten the bolts, lubricate the tables, etc ... because the various transports cause vibrations.
• Always use an extension cord of 2.5² wire size
• The extension cord must not exceed 10 meters and must not be rolled up
• Provide an electric meter with special machine starting fuses of at least 16A
• Have an electric meter up to standards with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the warranty of the machine
• Always grease cast iron tables with wood glide
• Always work with the guards in place
• Do not work with blunt or blunt irons, this can damage the mechanism, the planer advance, break the belt
• The machine does not start? No doubt the chip ejection housing is incorrectly positioned on the planer jointer side, it is a safety!

General description of Planer and thicknesser 250 mm Bernardo ADH250 :

• The mechanically welded frame, rigid and robust, ensures great stability.
• Adjustable aluminum planing guide, tiltable at 45 °, planer shaft with 3 irons.
• Pivoting gray cast iron planing tables.
• Automatic disengageable advance.
• The chip collector provides a dust and chip free working environment.
• Changeover from planing to planing by simple pivoting with positioning of the suction valve.

Technical characteristics of the Bernardo ADH250 thickness planer:

Jointer:

• Planing width: 253 mm
• Total length of jointer tables: 1085 mm
• Max pass : 2 mm
• Planer guide dimensions. : 700x130 mm
• Planer guide tilt: 90 ° -45 °

Planer:

• Max planing width: 245 mm
• Planing table length: 590 mm
• Max planing height : 185 mm (from 6 to 195 mm)
• Max pass : 2 mm on soft wood to 1 mm on hard wood
• Feed speed: 5.5 m / min
• Motor power output S1 (100%) / S6: 1.5 kW / 2.1 kW
• Voltage: 230V
• Shaft rotation speed: 4000 rpm
• Shaft diameter: 75 mm
• Number of irons: 3 (250x30x3mm)
• Weight approx: 140 kg
• Diameter of the suction nozzle: 100 mm

The Bernardo ADH250 planer thicknesser is delivered with:

• 3 resharpenable irons
• aluminum planing guide
• assembly tools
• tree protector

You do not yet have an essential chip vacuum cleaner? See the offer with vacuum cleaner included by clicking here: ADH250 + DC230