This Holzmann KOS2510N belt sander allows perfect sanding!

Its oscillation technique makes it possible to eliminate all roughness! Thanks to its sanding stop, you can also guide small parts safely and conveniently. Its base with storage will allow you excellent stability and storage of your accessories.

It is the superior model of the Holzmann KOS2260C sander because it has a more interesting sanding surface.

Advantages of the Holzmann KOS2510N belt sander:

• Quick release lever for band change.
• Tension spring guarantees automatic adjustment.
• Gradual tilting of the sanding unit for vertical and horizontal sanding operations.
• Graphite coating on the sanding table increases the sliding capacity of the sanding belt.
• mechanical oscillating sanding to ensure optimum use of the sanding belt.

Technical characteristics of the Holzmann KOS2510N belt sander:

• Worktable: 840x300mm
• Table height adjustment: 90mm
• Band length: 2510 mm
• Band width: 150mm
• Sanding table: 950x200 mm
• Tilting sanding unit: 90°- 0°
• Belt speed: 16 m/sec
• Support table: 300x250 mm
• Suction outlet: 100 mm
• Roll diameter: 100mm
• S1 motor: 1500W
• Voltage: 230V or 400V at 50hz
• Dimensions of the machine: L1400 x D680 x H1220 mm approximately
• Weight: 148kg

This Holzmann KOS2510N belt sander is delivered to you with: its lock cabinet base, 1 abrasive belt, 1 precision miter guide and the table stop.

Important Probois recommendation for many woodworking machines:

Before starting, always check the inside of your machine, see if the belts are fitted correctly, tighten the bolts, etc... because the various transports cause vibrations.

Always use a 2.5² wire size extension cord

The extension cord must not exceed 10 meters and must not be rolled up

The use of drums, triplets or multi-plugs is PROHIBITED

Have a standard electricity meter with neutral and earth

Always work with a chip extractor for your health and for the guarantee of the machine

Always grease cast iron tables with wood glider

Always work with guards in place

Do not work with blunt or blunt tools as this may damage the internal mechanism.