Filter By

Brand

Brand

Price

Price

  • €23.00 - €7,298.00

Woodworking machinery and tools promotions

All the best promotions in woodworking machines and tools, garden range: log splitters and log saws, machine accessories, everything for DIY at a low price!

Woodworking machinery and tools promotions - Probois machinoutils

There are 82 products.

Showing 1-82 of 82 item(s)

Active filters

Circular saw blade sharpener Bernardo SBS800 Circular saw blade sharpener Bernardo SBS800
  • -€25.00

Circular saw blade sharpener Bernardo SBS800

270.00 € Tax included €297.50 -€25.00

Bernardo SBS800 circular saw blade sharpener designed for sharpening blades from 80 to 1000 mm. It is equipped with a more rigid blade support arm than on the Bernardo SBS700 sharpener, allowing it to work larger diameters more easily.

Dust collector Bernardo DC400 Dust collector Bernardo DC400
  • -€40.00

Dust collector Bernardo DC400

395.00 € Tax included €437.50 -€40.00

With its increased storage capacity (+ 50% compared to the DC 300), the DC 400 vacuum cleaner is more practical, because it is necessary to change bags less often. This model offers optimum value for money for experienced DIY enthusiasts who want to keep a clean workshop.

Dust collector Bernardo ASA3500 Dust collector Bernardo ASA3500
  • -€60.00

Dust collector Bernardo ASA3500

495.00 € Tax included €557.50 -€60.00

The dust collector Bernardo ASA3500 is a dust collector that can be connected to 2 machines at the same time, with a 1500W motor and a suction power of 2530 m³ / h!

Dust collector Bernardo DC450CF Dust collector Bernardo DC450CF
  • -€40.00

Dust collector Bernardo DC450CF - 230V

795.00 € Tax included €837.50 -€40.00

The Bernardo DC450CF dust collector equipped with an FP2 filter cartridge offers a suction capacity of 2800 m³ / h and storage of 300 liters of chips!

Dust collector Bernardo... Dust collector Bernardo...
  • -€70.00

Dust collector Bernardo DC500E - 230V

495.00 € Tax included €567.50 -€70.00

The dust collector Bernardo DC500E has a capacity of 2 times 200 liters of chip storage, so more than its competitors, because its height is greater! It has a motor of 2200W, a suction power of 3880 m³ / h!

Air filtration system Leman... Air filtration system Leman...
  • -€25.00

Air filtration system Leman SFA300

430.00 € Tax included €457.50 -€25.00

Air filtration or air purification system for individuals and small workshops. Silent, it is equipped with 3 speeds controlled by an infrared remote control. It offers an air flow of 30 m3 / min.

Table circular saw Bernardo PKS250P Table circular saw Bernardo PKS250P
  • -€150.00

Table circular saw Bernardo PKS250P

1,345.00 € Tax included €1,497.50 -€150.00

The PKS 250 P precision saw features several technical innovations, such as a sliding table 1300, longitudinal fence with fine adjustment, sawblade tilting on the front side and many more, which are rather unusual for a machine of this size. Most commonly this model is used among amateurs, craftsmen and in small businesses.

Planer and thicknesser JET... Planer and thicknesser JET...
  • -€210.00

Planer and thicknesser JET JPT 10B

735.00 € Tax included €947.50 -€210.00

Planer thicknesser JET JPT 10B equipped with a 254 mm wide planing table and a powerful 1500W motor.

Planer thicknesser Bernardo ADM260 Planer thicknesser Bernardo ADM260
  • -€170.00

Planer and thicknesser Bernardo ADM260 - 230V

1,295.00 € Tax included €1,467.50 -€170.00

The planer thicknesser Bernardo ADM260 is a high-strength cast-iron machine that will meet the requirements of the discerning enthusiast with its 250 mm width!

Planer and thicknesser Bernardo AD260S with helical shaft - 230V Planer and thicknesser Bernardo AD260S with helical shaft - 230V
  • -€150.00

Planer and thicknesser Bernardo AD260S with helical shaft - 230V

1,745.00 € Tax included €1,897.50 -€150.00

The Bernardo AD260S planer jointer naturally meets the requirements for stability, high power and safety. The other strong point of this machine is its helical knife planer shaft which reduces noise stress and ensures optimum results.

Planer and thicknesser Bernardo FS310PS with helical shaft - 230V Planer and thicknesser Bernardo FS310PS with helical shaft - 230V
  • On sale!
  • -€100.00

Planer and thicknesser Bernardo FS310PS with helical shaft - 230V

2,295.00 € Tax included €2,397.50 -€100.00

Bernardo FS310PS planer thicknesser with an optimal price-performance ratio. This model of course meets the requirements of stability, high power and safety. The other strong point of this machine is its helical shaft which reduces the constraints related to noise and ensures optimal results.

Mortiser square chisel tilting Holzmann STM26S Mortiser square chisel tilting Holzmann STM26S
  • -€71.00

Hollow Chisel Mortiser Holzmann STM26S

1,199.00 € Tax included €1,272.50 -€71.00

The mortiser to square chisel Holzmann STM26S has the same features as its competitors, the tilting head on the right and on the left!

Drum sander Bernardo ZSM405 Drum sander Bernardo ZSM405
  • -€100.00

Drum sander Bernardo ZSM405 - 230V

995.00 € Tax included €1,097.50 -€100.00

The ZSM 405 cylinder sander is suitable for sanding work on workpieces up to 810 mm wide. Conveyor feed speed varies to match the parts for optimal results.

Double cylinder sander Bernardo WBS 640 Pro Double cylinder sander Bernardo WBS 640 Pro
  • -€300.00

Double cylinder sander Bernardo WBS 640 Pro - 230V

3,095.00 € Tax included €3,397.50 -€300.00

The model WBS 640 Pro is a professional cylinder sanding machine with stepless adjustable feed rate. Thanks to the 2 sanding rollers, rough and fine sanding can be carried out in one pass by using different sanding belt grain sizes. The heavy machine stand ensures high stability and thus precise grinding results.

Plunge saw Scheppach PL55 Plunge saw Scheppach PL55
  • -€20.00

Plunge saw Scheppach PL55

89.00 € Tax included €109.50 -€20.00

This Scheppach PL55 plunge saw is cut for the do-it-yourselfer, for carpentry or layout work. The plunging attack allows to cut in full panel, up to 55 mm thick.

Bandsaw Holzmann HBS230ECO Bandsaw Holzmann HBS230ECO
  • -€6.00

Bandsaw Holzmann HBS230ECO

203.00 € Tax included €211.50 -€6.00

Small compact and lightweight Holzmann HBS230ECO band saw ideal for small jobs.

Bernardo HBS450 band saw - 345 mm cut and 2200W - 230V Bernardo HBS450 band saw - 345 mm cut and 2200W - 230V
  • -€100.00

Bernardo HBS450 band saw - 345 mm cut and 2200W - 230V

1,795.00 € Tax included €1,897.50 -€100.00

The Bernardo HBS450 bandsaw seduces with its large ground table and gray cast iron steering wheels. For the budget-conscious DIYer, this is the ideal machine.

Bandsaw JET JWBS-15 flywheel 375 mm (Cut 356 mm) - 230V
  • -€31.00

Bandsaw JET JWBS-15 flywheel 375 mm (Cut 356 mm) - 230V

2,899.00 € Tax included €2,932.50 -€31.00

The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.

Band saw Bernardo HBS460N Band saw Bernardo HBS460N
  • -€100.00

Band saw Bernardo HBS460N - 230V

1,995.00 € Tax included €2,097.50 -€100.00

The Bernardo HBS460N band saw is the ideal machine for ambitious DIY enthusiasts. This model is fitted with a 2-speed gearbox as standard. The machine also has a quick-release lever to change the tape quickly.

Wood lathe JET JWL1440VS
  • -€480.00

Wood lathe JET JWL1440VS

1,825.00 € Tax included €2,307.50 -€480.00

1st model in the range on a stand, this JWL 1440VS-M lathe will allow you to carry out all your projects.

Wood Lathe JET JWL-1640EVS Wood Lathe JET JWL-1640EVS
  • -€980.00

Wood Lathe JET JWL-1640EVS

2,595.00 € Tax included €3,577.50 -€980.00

Equipped with a 2-speed motor, this JET JWL 1640EVS lathe with variation in each range, will allow you to carry out all your projects.

Horizontal log splitter 7... Horizontal log splitter 7...
  • -€40.00

Horizontal log splitter 7 tons Scheppach HL760L + base

355.00 € Tax included €397.50 -€40.00

Thanks to its 7 tonnes of splitting power, the scheppach HL760L horizontal log splitter splits firewood up to 52 cm in length, the log size suitable for wood stoves. It is delivered to Probois Machinoutils with its base!

Log saw Leman LOSAB601LC - 600 mm Log saw Leman LOSAB601LC - 600 mm
  • -€356.00

Log saw Leman LOSAB601LC - 600 mm

799.00 € Tax included €1,157.50 -€356.00

Leman LOSAB601LC log saw conforms to the new Standard NF EN 1870-6 equipped with a mechanically welded frame offering strength, stability and maximum resistance to torsion.

Cordless Hedge Trimmer... Cordless Hedge Trimmer...
  • -€50.00

Cordless Hedge Trimmer Metabo AHS 18-45 V

179.00 € Tax included €229.50 -€50.00

Metabo AHS 18-45 V cordless hedge trimmer with blades with special geometry for low wear and therefore 200% longer service life.

Cordless Hedge Trimmer Metabo AHS 18-65 V Cordless Hedge Trimmer Metabo AHS 18-65 V
  • -€50.00

Cordless Hedge Trimmer Metabo AHS 18-65 V

179.00 € Tax included €229.50 -€50.00

Lightweight, powerful and quiet Metabo AHS 18-65 V cordless hedge trimmer for noise-sensitive areas.

Without battery or charger

Cordless brushcutter Metabo FSB 36-18 LTX BL 40 Cordless brushcutter Metabo FSB 36-18 LTX BL 40
  • -€60.00

Cordless brushcutter Metabo FSB 36-18 LTX BL 40

239.00 € Tax included €299.50 -€60.00

Quiet Metabo FSB 36-18 LTX BL 40 cordless brushcutter with adjustable two-handed handle for comfortable working on large areas.

Without battery or charger

Chainsaw Scheppach CSP2540 - 26 cm3 Chainsaw Scheppach CSP2540 - 26 cm3
  • -€20.00

Chainsaw Woodster CSP10 - 26 cm3

99.99 € Tax included €120.49 -€20.00

This pruner Woodster CSP10 equipped with a powerful 2-stroke 25.3 cm3, very efficient has a powerful torque!

Demolition hammer Scheppach AB1900 Demolition hammer Scheppach AB1900
  • On sale!
  • -€60.00

Demolition hammer Scheppach AB1900

165.00 € Tax included €225.50 -€60.00

Jackhammer 17 kg with a percussion force of 60 Joules ideal for demanding work!

Milling and drilling metal machine Bernardo KF16LVARIO Milling and drilling metal machine Bernardo KF16LVARIO
  • -€70.00

Milling and drilling metal machine Bernardo KF16LVARIO

1,425.00 € Tax included €1,497.50 -€70.00

The KF 16 L Vario is a small and compact drilling machine, featuring a digital speed and spindle stroke display. This modell is widely used among precision mechanics and technically-minded model makers.

Metal lathe Bernardo Profi 400 V Metal lathe Bernardo Profi 400 V
  • -€150.00

Metal lathe Bernardo Profi 400 V - 230V

1,295.00 € Tax included €1,447.50 -€150.00

Thanks to theoptimal quality-price ratio, This model is perfect for the modelers and the DIY.

Metal lathe Bernardo Profi 550 WQV Metal lathe Bernardo Profi 550 WQV
  • -€170.00

Metal lathe Bernardo Profi 550 WQV

2,425.00 € Tax included €2,597.50 -€170.00

The Profi 550 WQV precision lathe is manufactured according to the strictest DIN standards.

Metal lathe Bernardo Profi 550 WQ - 230V Metal lathe Bernardo Profi 550 WQ - 230V
  • -€200.00

Metal lathe Bernardo Profi 550 WQ - 230V

1,995.00 € Tax included €2,197.50 -€200.00

The metal lathe precision Profi 550 WQ is manufactured according to the strictest requirements of the DIN standards. Its particularity lies in its wide range of longitudinal feed, 6 forward speeds to choose from, plus an advance cross-sectional series.

Metal lathe Bernardo Proficenter 700 BQV Metal lathe Bernardo Proficenter 700 BQV
  • -€500.00

Metal lathe Bernardo Proficenter 700 BQV

4,295.00 € Tax included €4,797.50 -€500.00

The Proficenter 700 BQV is a high-end model that meets all the needs of precision mechanics and training or apprenticeship workshops.

Bernardo BM20 Vario bench pillar drill Bernardo BM20 Vario bench pillar drill
  • -€100.00

Bench drill Bernardo BM20 Vario

695.00 € Tax included €797.50 -€100.00

The Bench drill Bernardo BM20 Vario offers high torque even at low speed due to its variable speed and a capacity of 20 mm in steel.

Radial floor column drill...
  • -€30.00

Radial floor column drill Leman PRC016

565.00 € Tax included €597.50 -€30.00

Radial floor drill Leman PRC016 East of robust manufacturing, large diameter column, equipped with quick Chuck. 

Drill press Leman PRC020 Drill press Leman PRC020
  • -€50.00

Drill press Leman PRC020

515.00 € Tax included €567.50 -€50.00

The Geneva PRC020 drill offers 20 mm drilling with a 600W motor capacity

Tool trolley Scheppach TW1000 Tool trolley Scheppach TW1000
  • -€130.00

Tool trolley Scheppach TW1000

429.00 € Tax included €559.00 -€130.00

The tool trolley Scheppach TW1000 comes equipped with A 263 tools !

Tool case Scheppach TB150 - 101 pieces Tool case Scheppach TB150 - 101 pieces
  • -€70.00

Tool case Scheppach TB150 - 101 pieces

89.00 € Tax included €159.00 -€70.00

Hang a frame? No problem. Tighten the screws of the bunk bed? No problem. A dripping faucet? No problem, when the case is close at hand, for example the TB150 from scheppach, a well-organized tool case for home needs, with a full assortment of basic chrome vanadium tools.

Plasma cutter Scheppach PLC40 Plasma cutter Scheppach PLC40
  • -€40.00

Plasma cutter Scheppach PLC40

169.00 € Tax included €209.50 -€40.00

Powerful and compact Scheppach PLC40 plasma cutter emitting a regular plasma beam and allowing to cut up to 12 mm thick.

Welding machine MIG/MAG Holzmann MSA250
  • -€130.00

Welding machine MIG/MAG Holzmann MSA250

895.00 € Tax included €1,027.50 -€130.00

MIG/MAG welding machine Holzmann MSA250 of compact structure, high performance, suitable for the welding by points, continuously and in space.

Angle Polisher Metabo PE15-20RT Angle Polisher Metabo PE15-20RT
  • -€100.00

Angle Polisher Metabo PE15-20RT

299.00 € Tax included €399.50 -€100.00

Metabo PE15-20RT angle polisher with high torque for fine sanding and high-gloss polishing of lacquered surfaces.

Block splitter Scheppach HSC130 Block splitter Scheppach HSC130
  • -€86.00

Block splitter Scheppach HSC130

199.00 € Tax included €285.00 -€86.00

Scheppach HSC130 pavers cut is suitable for cutting pavers, slabs and curbs in the commercial formats.

Electric tile cutter Zipper ZI-FS115
  • -€10.00

Electric tile cutter Zipper ZI-FS115

58.99 € Tax included €69.49 -€10.00

This small Zipper ZI-FS115 electric tile cutter is a practical and ergonomic machine that can be transported easily!

Wood lathe JET JWL-1221- 6-speed - 230V
  • -€380.00

Wood lathe JET JWL-1221- 6-speed - 230V

795.00 € Tax included €1,177.50 -€380.00

With its 500 mm between centers, this lathe will allow you many achievements. Coupled with its bench extension, pieces of around 1m will no longer be a problem for you.

Wood lathe Leman TAB085 Wood lathe Leman TAB085
  • -€69.00

Wood lathe Leman TAB085

595.00 € Tax included €666.50 -€69.00

The Leman TAB085 wood lathe was designed for the use and needs of a novice lathe operator, its price is attractive for a satisfactory overall quality.

Combined with wood 5 operations Bernardo 250 mm CWM250 Top Combined with wood 5 operations Bernardo 250 mm CWM250 Top
  • -€230.00

Combined with wood 5 operations Bernardo 250 mm CWM250 Top

3,895.00 € Tax included €4,127.50 -€230.00

This Bernardo CWM250 Top Austrian wood-burning handset has cast iron tables, 3 independent motors and interesting capacity for its small volume! The CWM250 Top is distinguished by its higher sawing height!

Planer and thicknesser Leman LODRA210 (210 mm planer and 194 mm planer!) Planer and thicknesser Leman LODRA210 (210 mm planer and 194 mm planer!)
  • -€20.00

Planer and thicknesser Leman LODRA210

425.00 € Tax included €447.50 -€20.00

The Leman LODRA210 jointer and planer offers 210 mm for jointing and 194 mm for planing too! Lightweight machine easy to transport and handle!

Metal lathe Bernardo Hobby 500 - 230V Metal lathe Bernardo Hobby 500 - 230V
  • -€100.00

Metal lathe Bernardo Hobby 500 - 230V

1,495.00 € Tax included €1,597.50 -€100.00

This metal lathe Bernardo Hobby 500 has an optimum price / performance ratio !

Bandsaw Bernardo HBS320 - Cut 170 mm - 750W

675.00 € Tax included

The HBS 320 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.

Bandsaw Bernardo HBS260 Bandsaw Bernardo HBS260
  • -€40.00

Bandsaw Bernardo HBS260 - Cut 150 mm - 370W

455.00 € Tax included €497.50 -€40.00

The HBS 260 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.